ISSN:
0748-8025
Schlagwort(e):
Engineering
;
Engineering General
Quelle:
Wiley InterScience Backfile Collection 1832-2000
Thema:
Mathematik
,
Technik allgemein
Notizen:
A method is presented for analysing industrial heat transfer problems in which there is a transition. The finite element method is used, and for the calculations the special-purpose heat transfer program THAFEM is utilized. The latent heat of a region with phase-change material (PCM) is concentrated at the nodes of the elements in the region. The method is rapid and gives the necessary agreement between calculations and experimental results.As an example filling of explosives is considered. In order to avoid the formation of closed volumes of melted material surrounded by solidified explosive, it is necessary to control the cooling of the high-explosive shell. The PCM is mainly trinitrotoluene with a melting point of 80.3°C. Another example that shows the applicability of the method is a fire-proof floppy-disk cabinet with walls made from layers of Glauber's salt, a PCM with a melting point of 32°C. The cabinet should withstand a fire, without the inside temperature exceeding the maximum allowed value of 52°C, for a prescribed time.
Zusätzliches Material:
8 Ill.
Materialart:
Digitale Medien
URL:
http://dx.doi.org/10.1002/cnm.1630040503
Permalink
