ISSN:
1572-8838
Schlagwort(e):
fuel cells
;
PEMFC
;
oxygen cathode
;
electrode porosity
;
mass transport
Quelle:
Springer Online Journal Archives 1860-2000
Thema:
Chemie und Pharmazie
,
Elektrotechnik, Elektronik, Nachrichtentechnik
Notizen:
Abstract Better performance of and higher electrocatalyst utilization in proton-exchange membrane fuel cells equipped with thin film electrodes is achieved by exploiting pore forming additives in the electrode recipe formulation. Preparing the membrane–electrode assembly by a hot spraying procedure already provides 35% porosity. Additional coarse porosity is obtained by adding pore formers to the electrocatalyst slurry which is used for the hot spraying process. This allows for a better access of oxygen from air to the depth of the cathode. For air operation at ambient pressure and low catalyst loading of 0.15mgPtcm-2 a current density of 200mAcm-2 at 0.7V cell voltage can be obtained with such electrodes.
Materialart:
Digitale Medien
URL:
http://dx.doi.org/10.1023/A:1003259531775
Permalink