ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Corrosive effect on steel of some simple salts during the salt spray testThe authors using a salt spray cabinet according to an ASTM standard have investigated the corrosion of steel St 37 by distilled water and 0.05 N solutions of sodium fluoride, chloride, bromide, iodide, sulfate and phosphate. According to the results obtained the corrosion rates by sodium chloride, bromide, iodide and sulfate are practically identical (within the limits of the experimental error) with a mean value of 14.0 ± 0.2 g/m2 · day in the period from the third week to the end of the tests (84 days). The different overall losses found by the end of the tests can be attributed to differences in the behaviour during the initial period of the tests. From among the halides only fluoride attacks at a corrosion rate which - though also constant - is rather low (3.4 g/m2 · day). The corrosion rate in distilled water is characterized by an asymptotic approach to zero. In the case of sodium phosphate the overall corrosion is negligible because of the inhibiting effect of this salt.
Notes:
In einer Salzsprühkammer nach ASTM-Vorschrift wurde die Korrosionswirkung auf Stahl ST 37 bei Verwendung von destilliertem Wasser und jeweils 0,050 n Lösungen von Natriumfluorid, Natriumchlorid, Natriumbromid, Natriumjodid, Natriumsulfat und Natriumphosphat untersucht. Es zeigte sich, daß ab zwei Wochen Versuchsdauer bis zum Ende der Versuche (84 Tage) die Korrosionsgeschwindigkeit bei Natriumchlorid, Natriumbromid, Natriumjodid und Natriumsulfat innerhalb der Versuchsgenauigkeit gleich hoch lag und im Mittel 14,0 ± 0,2 g/m2 Tag betrug. Die unterschiedlichen Gesamtkorrosionsverluste zu Ende der Versuchsdauer sind auf verschiedenes Verhalten während der Anfangsperiode zurückzuführen. Unter den Halogeniden verursachte nur Fluorid eine zwar auch konstante, aber viel niedrigere Korrosionsgeschwindigkeit von 3,4 g/m2/Tag. Bei Anwendung von destilliertem Wasser ergab sich eine asymptotisch gegen Null strebende Korrosionsgeschwindigkeit; ebenso mit Natriumphosphat, bei dem durch den Inhibitionseffekt die Gesamtkorrosion vernachlässigbar niedrig blieb.
Additional Material:
2 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19750260706