ISSN:
1089-7623
Source:
AIP Digital Archive
Topics:
Physics
,
Electrical Engineering, Measurement and Control Technology
Notes:
Production of the intense accelerated 48Ca ion beam is the key problem in the experiments on synthesizing of new heavy nuclei. For this purpose an axial injection system with the electron cyclotron resonance (ECR)-4M ion source was created for the U400 cyclotron. The task was to achieve an accelerated beam with an intensity of 0.5 pμA of 48Ca5+ at the 48Ca consumption of ∼0.5 mg/h. To solve this problem, a new method for the solid material feed into the ECR source was developed. The combination of a micro oven with a hot tantalum sheet inside the discharge chamber allowed the production of intense beams of ions of metals with relatively low melting point. The present article describes the method, technique, and experimental results on the production of 48Ca ion beam at the U-400 cyclotron from the ECR-4M ion source. The analysis of the working substance balance in the ion source including the ion beam extraction and material regeneration is performed. The analysis based on the experimental data has shown that the efficiency of Ca atom transformation into ion beam is close to that obtained for the gases such as Ar, and the intensity of 48Ca5+ constitutes about 20% of the extracted ion beam. © 2000 American Institute of Physics.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.1150313
