ISSN:
1435-1528
Keywords:
Two-dimensional flow
;
viscoelastic plastic medium
;
yield surface
;
contraction and expansion flow
;
pressure drop
Source:
Springer Online Journal Archives 1860-2000
Topics:
Chemistry and Pharmacology
,
Physics
Notes:
Abstract The present study is concerned with finite element simulation of the planar entry flow of a viscoelastic plastic medium exhibiting yield stress. The numerical scheme is based on the Galerkin formulation. Flow experiments are carried out on a carbon black filled rubber compound. Steady-state pressure drops are measured on two sets of contraction or expansion dies having different lengths and a constant contraction or expansion ratio of 4:1 with entrance angles of 90, 45 and 15 degrees. The predicted and measured pressure drops are compared. The predicted results indicate that expansion flow has always a higher pressure drop than contraction flow. This prediction is in agreement with experimental data only at low flow rates, but not at high flow rates. The latter disagreement is possibly an indication that the assumption of fully-developed flow in the upstream and downstream regions is not realistic at high flow rates, even for the large length-to-thickness ratio channels employed. The evolution of the velocity, shear stress, and normal stress fields in the contraction or expansion flow and the location of pseudo-yield surfaces are also calculated.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00366681
