ISSN:
1077-3118
Source:
AIP Digital Archive
Topics:
Physics
Notes:
We describe a new method for removing thin, large area sheets of diamond from bulk or homoepitaxial diamond crystals. This method consists of an ion implantation step, followed by a selective etching procedure. High energy (4–5 MeV) implantation of carbon or oxygen ions creates a well-defined layer of damaged diamond that is buried at a controlled depth below the surface. For C implantations, this layer is graphitized by annealing in vacuum, and then etched in either an acid solution, or by heating at 550–600 °C in oxygen. This process successfully lifts off the diamond plate above the graphite layer. For O implantations of a suitable dose (3×1017 cm−2 or greater), the liftoff is achieved by annealing in vacuum or flowing oxygen. In this case, the O required for etching of the graphitic layer is also supplied internally by the implantation. This liftoff method, combined with well-established homoepitaxial growth processes, has considerable potential for the fabrication of large area single crystalline diamond sheets.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.107981
