ISSN:
1089-7550
Source:
AIP Digital Archive
Topics:
Physics
Notes:
Extremely thin titanium nitride (TiN) barrier layers for Cu based interconnects were deposited using metal organic chemical vapor deposition. The effect of the subsequently performed nitrogen/hydrogen plasma treatment on the microstructure, composition, and electrical properties of these films is studied using conventional and high resolution transmission electron microscopy, Auger electron spectroscopy, and four point probe resistivity measurements. In the studied system the crystallization of the TiN film starts from an amorphous matrix and a polycrystalline morphology is developed upon the H2/N2 plasma treatment. After a short plasma treatment, most of the film is already crystalline and consists of grains of a few nanometers in diameter. Continued plasma treatment leads to grain growth and a significant reduction of contaminants such as oxygen and carbon. The resistivity of the films drops with plasma treatment time, and a correlation between resistivity and oxygen content is found, which suggests that oxygen in the grain boundaries plays a decisive role for the resistivity of the films. It is shown that the oxygen in the grain boundaries leads to an electron reflectance of 0.9. Thus, the oxygen accumulation in the grain boundaries is the limiting factor for the reduction of film resistivity by plasma treatment. © 2002 American Institute of Physics.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.1459750
