ISSN:
1089-7623
Source:
AIP Digital Archive
Topics:
Physics
,
Electrical Engineering, Measurement and Control Technology
Notes:
A first adaptive x-ray mirror prototype was built in 1992 and is now installed on the ESRF beamline 2 (Materials Science). This system consists of a water-cooled 1 m long Pt-coated Si mirror, supported by two rows of 11 piezoelectric actuators. The shape of the mirror is continuously monitored by an optical analyzer; its readout being used by a feedback loop in a real-time algorithm. A workstation associated to real-time electronics calculates the relevant parameters for driving the actuators as a function of both the desired shape and the possible thermal deformation due to the incident beam. Preliminary experiments carried out on the wiggler beamline showed that the system runs correctly: the feedback loop permits a control of the mirror shape in the microrad range at a frequency of 10 Hz. Various shapes (cylinder, parabola, or ellipse) can be produced at will to within the above accuracy. The different components of the device are described and the alignment and calibration procedures are discussed. The first results dealing with the properties of the reflected beam (size, divergence, and shape) versus both the calibration quality and the incoming power are presented. © 1995 American Institute of Physics.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.1145725
