Digitale Medien
PO Box 1354, 9600 Garsington Road, Oxford OX4 2XG, UK.
:
Blackwell Science Ltd
Fatigue & fracture of engineering materials & structures
27 (2004), S. 0
ISSN:
1460-2695
Quelle:
Blackwell Publishing Journal Backfiles 1879-2005
Thema:
Maschinenbau
Notizen:
Flaking type failure in rolling-contact processes is usually attributed to fatigue-induced subsurface shearing stress caused by the contact loading. Assuming such crack growth is due to mode II loading and that mode I growth is suppressed due to the compressive stress field arising from the contact stress, we developed a new testing apparatus for mode II fatigue crack growth. Although the apparatus is, as a former apparatus was, based on the principle that the static KI mode and the compressive stress parallel to the pre-crack are superimposed on the mode II loading system, we employ direct loading in the new apparatus. Instead of the simple four-point-shear-loading system used in the former apparatus, a new device for the application of a compressive stress parallel to the pre-crack has been developed. Due to these alterations, mode II cyclic loading tests for hard steels have become possible for arbitrary stress ratios, including fully reversed loading (R=−1); which is the case of rolling-contact fatigue. The test results obtained using the newly developed apparatus on specimens made from bearing steel SUJ2 and also a 0.75% carbon steel, are shown.
Materialart:
Digitale Medien
URL:
http://dx.doi.org/10.1111/j.1460-2695.2004.00747.x
Permalink
Bibliothek |
Standort |
Signatur |
Band/Heft/Jahr |
Verfügbarkeit |