ISSN:
1432-1114
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract The paper describes the atomisation process of a liquid in an axissymmetric shear layer formed through the interaction of turbulent coaxial jets (respectively, inner and outer jets), with and without swirl, in a model airblast prefilming atomiser. The atomisation process and spray quality was studied using different visualisation techniques, namely laser shadowgraphy and digital image acquisition. The experiments were conducted for different liquid flow rates, Reynolds numbers ranging from 6600 to 66000 and 27300 to 92900 for the inner and outer air flows, respectively, for different outer flow swirl levels, and two liquid film thicknesses −0.2 and 0.7 mm. All the tests were carried out at atmospheric pressure and using water. The results include the analysis of the film structure at break-up and of the break-up length, and suggest that the deterioration of the liquid film close to the atomising edge exhibits a periodic behaviour and is mainly dependent on the inner air velocity. Film thickness strongly affects the time and length scales of the break-up process for the lower range of air velocities. For higher inner air velocities, the break-up length and time become less dependent on liquid flow rate and initial film thickness.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/s003480050190
Permalink