ISSN:
1089-7550
Source:
AIP Digital Archive
Topics:
Physics
Notes:
The cathode phenomena during the conduction phase of a pseudospark discharge are investigated with different cathode materials: Cu, Mo, Ni, Ta, and W/Re. The discharge gas was hydrogen with a gas pressure of 40 Pa. At a pulse duration of 2.7 μs and a maximum current of 9 kA, i.e., at a transferred charge of 11 mC/discharge, mass erosion rates of the cathode materials showed no significant material dependence after 106 discharges. Fast framing photography (end-on, exposure time: 5 ns) of the light emission from the cathode surface revealed several small spots simultaneously, distributed over a cathode surface of 1 cm2. The distribution of metal and hydrogen spectral lines at the cathode surface and in the gap were compared. Metal lines are localized on the cathode surface, whereas the hydrogen Balmer β-line is diffuse over the electrodes surfaces and the gap. Polished electrodes showed, after a single pulse, about 107 craters with 0.5–5 μm in diameter. This is leading to a local current density of about 108 A/cm2 in a single crater.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.357071
Permalink