ISSN:
1089-7550
Source:
AIP Digital Archive
Topics:
Physics
Notes:
Bi2(Zn1/3Nb2/3)2O7 (BZN) thin films were prepared by using a pulsed laser deposition technique. For films in situ deposited on indium–tin oxide (ITO) coated glass substrates, the crystalline phase can be obtained by growing at a substrate temperature (Ts) higher than 475 °C. Too low a substrate temperature (Ts〈400 °C) results in the amorphous phase, whereas too high a temperature (Ts〉600 °C) leads to substantial interaction between the BZN film and the ITO layer. For the films deposited at a 500 °C substrate temperature, the texture characteristics change with their thickness. The films are (222) preferentially oriented when they are thin, and (400) preferentially oriented when they are thick. The optical properties, measured using optical spectroscopy, reveal that the index of refraction (n) and absorption coefficient (κ) vary between n=2.08−2.51 and κ=1.22×10−5−1.88×10−4 nm−1, respectively. These optical parameters do not change significantly with the preferred orientation and thickness of the films. However, the low frequency dielectric properties are closely correlated with the material's characteristics. The crystalline BZN films have a markedly larger dielectric constant than the amorphous films. © 2000 American Institute of Physics.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.371887
Permalink
