ISSN:
1662-9752
Source:
Scientific.Net: Materials Science & Technology / Trans Tech Publications Archiv 1984-2008
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Indium tin oxide (ITO) thin films were deposited on glass substrates via sol-gel spin coating process from a mixed solution of Indium (Ⅲ) acetylacetonate and Tin (Ⅳ) iso-propoxide. Then, ITO thin films were fired at 500℃, and then annealed at 500℃ for 30 min with the sequential annealing process; Vacuum[removed info]N2[removed info]Ar/H2, N2[removed info]Ar/H2 and Ar/H2 gas. The effects of the different annealing processes on the surface morphologies and sheet resistance of ITO thin films were investigated. Sheet resistance values of ITO thin films treated under Vacuum[removed info]N2[removed info]Ar/H2,N2[removed info]Ar/H2 and Ar/H2 annealing process were 1.25 kohm/sq., 3.18 kohm/sq. and 4.92 kohm/sq., respectively. Actually, the sequential atmosphere gases and non-oxidizing gas, which were used in annealing process influenced the microstructural features or surface morphologies of ITO thin films: grain size and surface roughness. Thus, it was presumed that the sequential annealing condition influenced the densification behavior in the microstructural evolution of ITO thin films
Type of Medium:
Electronic Resource
URL:
http://www.tib-hannover.de/fulltexts/2011/0528/02/10/transtech_doi~10.4028%252Fwww.scientific.net%252FMSF.492-493.325.pdf
Permalink