Electronic Resource
[S.l.]
:
American Institute of Physics (AIP)
Journal of Applied Physics
86 (1999), S. 2191-2195
ISSN:
1089-7550
Source:
AIP Digital Archive
Topics:
Physics
Notes:
Barium hexaferrite (BaM) thin films were deposited on (0001) LiTaO3 substrates by pulsed laser deposition. Effects of the substrate temperature and oxygen gas pressure on the formation and quality of these films were studied. Films deposited at a substrate temperature of 800 °C and an oxygen pressure around 0.23 mbar showed the best c axis normal to the film plane with locked in-plane orientation. The saturation magnetization Ms and anisotropy field Ha measured by vibrating sample magnetometer were almost the same as those reported on bulk barium ferrite. Decreasing oxygen pressure hinders the formation of the Ba layer in BaM magnetoplumbite structure and gives rise to the spinel phase, which greatly decreases coercivity Hc of the films and finally destroys the whole BaM structure. Effects of the lattice mismatch and substrate-induced strains on the film structure were also studied. It was found that barium ferrite thin films grown on LiTaO3 substrates tend to choose a matching mode with compressional strains rather than shear strains. © 1999 American Institute of Physics.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.371029
Permalink
| Library |
Location |
Call Number |
Volume/Issue/Year |
Availability |
