ISSN:
1432-1858
Source:
Springer Online Journal Archives 1860-2000
Topics:
Electrical Engineering, Measurement and Control Technology
,
Technology
Notes:
Abstract Direct LIGA; LIGA without injection molding; has the potential to become a cost effective, high throughput form of LIGA. The process requires high energy photons; near 20,000 eV; which are best produced in facilities such as the X-ray ring at Brookhaven National Laboratory. The increased absorption lengths over lower energy photons eliminates the need for a membrane type X-ray mask. This in turn facilitates very large area X-ray masks fabricated from standard silicon wafers with 20 μm gold absorbers. The absorption length increase in PMMA to 2 cm is used to implement stacked PMMA exposures in which 1 mm thick PMMA layers are used to produce exposed PMMA sheets. These sheets are eventually solvent bonded to working substrates with plating bases. New high energy X-ray masks have been developed. Two exposure stations at Brookhaven are operational. The recently commissioned manufacturing exposure station which uses a 22 inch scanner which can expose four separate PMMA-mask combination is in the testing phase.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/s005420050007
Permalink