ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Flow dependence of the pitting of a CrNi steel in NaCl solution. Pt. I: Experiments with the rotating discThe pitting of the CrNi steel (German designation X 5 CrNi 18 9, Werkstoff Nr. 1.4301) in NaCl solution (1 and 3 N) at 25 °C has been investigated with the aid of the rotating disc, with a view to its dependence from the number of revolutions and the thickness of the diffusion layer. Potentiokinetic and potentiostatic experiments have shown, that the pitting potential for stable pitting is a function of flow in a more pronounced way than the potential for repassivating pitting corrosion. The pitting density increases as the number of revolutions increases and the thickness of the diffusion layer decreases, while the corrosion limiting current density and the average and maximum pit radii decreases in the same conditions. This goes to show that the sit locations are repassivated when exceeding a critical size which decreases with increasing number of revolutions. Contrary to the conditions prevailing in stagnant solutions where the pit density is almost independent from time, new pits are generated permanently despite repassivation under conditions of flow. Consequently, there is a apparent increase of pit density with time.
Notes:
Die Lochkorrosion des Chrom-Nickel-Stahles X 5 CrNi 18 9, Werkstoff Nr. 1.4301, in NaCl-Lösungen (1 und 3 n) bei 25 °C wurde mit Hilfe der rotierenden Scheibe in Abhängigkeit von der Drehzahl bzw. von der Diffusionsschichtdicke untersucht. Potentiokinetische und potentiostatische Versuche zeigten, daß das Lochfraßpotential für stabile Lochkorrosion wesentlich mehr durch Strömung beeinflußt wird als das Lochfraßpotential für repassivierbare Lochkorrosion. Mit zunehmender Drehzahl bzw. mit abnehmender Diffusionsschichtdicke nehmen die Lochdichte zu und die Korrosionsgrenzstromdichte sowie die durchschnittlichen und maximalen Lochradien ab. Das besagt, daß die Lochfraßstellen oberhalb einer kritischen Größe repassiviert werden, die mit steigender Drehzahl abnimmt. Im Gegensatz zu den Verhältnissen in ruhenden Lösungen, in denen die Lochdichte zeitlich nahezu konstant bleibt, werden bei Strömung neben der Repassivierung ständig neue Lochfraßstellen erzeugt. Die Lochdichte nimmt hier also mit der Zeit scheinbar zu.
Additional Material:
11 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19730240202
Permalink