ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Problems related to the measurement of IR-drop free potentials in the presence of compensating currentsFor supervision of the cathodic protection of pipelines the potentials must be measured free from ohmic drops. In general, off-potentials are measured in this context. By this technique only the ohmic drops caused by the protection current can be eliminated, but not the ohmic drops caused by compensating or cell currents. With the help of simulated tests it can be shown that it is possible to calculate true potentials using pipe-to-soil potentials and potential gradients at the soil surface for “on” and “off” conditions. Errors associated with reference electrodes have a strong influence on the calculated values. Practical examples show that completely unreasonable values can be obtained.Possibilities leading to errors of reference electrodes are discussed. Electrodes with KCl or NH4NO3 electrolytes are to be preferred. Further possibilities of errors related to soil parameters require additional detailed investigations.
Notes:
Für die Überwachung des kathodischen Korrosionsschutzes von Rohrleitungen müssen die Potentiale möglichst frei von ohmschen Spannungsabfällen gemessen werden. Hierzu wird im allgemeinen die Ausschaltmethode angewendet. Dabei lassen sich aber nur die ohmschen Spannungsabfälle des Schutzstromes, nicht die von Element- oder Ausgleichsströmen eliminieren. Mit Hilfe von Modellbetrachtungen kann gezeigt werden, daß eine Berechnung der wahren Potentiale gelingt, wenn Ein- und Ausschaltwerte von Potentialen und Potentialgradienten auf der Erdoberfläche vorliegen. Dabei gehen aber mit einem großen Faktor Elektrodenfehler der Bezugselektroden ein. Praktische Beispiele zeigen, daß völlig unvernünftige Resultate erhalten werden können.Es werden mehrere Möglichkeiten aufgezeigt, die als Ursachen für Elektrodenfehler infrage kommen. Demnach sind Bezugselektroden-Systeme mit KCl oder NH4NO3-Lösungen vorzuziehen. Weitere Fehlerursachen, die im wesentlichen auf bodenseitige Parameter zurückzuführen sind, bedürfen noch einer näheren Untersuchung.
Additional Material:
1 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19880390104