ISSN:
1089-7550
Source:
AIP Digital Archive
Topics:
Physics
Notes:
The possibility of replacing Pt in the Ti/Pt/Au base and traditionally used metallurgical structure by Ni, while bonding InP laser chip to a submount with AuSn (80% Au) solder, has been investigated. Various Ni-based metal alloys have been prepared by evaporation. Reflow experiments were conducted in a chamber under forming gas-controlled ambient. The Ti/Ni/AuSn system provided much longer surface local freezing duration compared to the Ti/Pt/AuSn system. Scanning electron microscopy analysis revealed a smoother surface morphology for the Ti/Ni/AuSn system after the metal refroze. Auger electron spectroscopy depth profiles indicated the formation of a Ni-Sn-Au interacted layer. The interaction took place in two steps: the first stage was the dissolution of Ni into the Au-Sn liquid followed by precipitation of a Ni-Sn-Au intermetallic compound; the second stage was a solid-state interdiffusion of Sn, Au, and Ni which occured in the interacted layer and in the original Ni layer. The latter step was a diffusion-controlled process, resulting in a very slow growth rate. Both Au and Sn reacted to form Ni alloy layers of almost equal thickness, regardless of the reaction duration (up to about 5 min). This intensive reaction, however, did not lead to full consumption of the Ti interfacial layer, which provided an excellent adhesion layer between the submount and the metallurgical structure.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.352279
Permalink