ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
The long-term corrosion rate of passive iron in anaerobic alcaline solutionsGas generation is an important issue in safety assessments of low and intermediate level radioactive repositories. In this connection the hydrogen production from corrosion of passive iron in saturated calcium hydroxide, in dilute alkali hydroxide and cement porewater solutions has been determined. The measurements were performed manometrically using fusion sealed glass cells, the measurement periods being between 275 and 560 days.In 0.1 M and 0.04 M alkali hydroxide solutions the initial hydrogen generation rate was 12 mmol/m2yr corresponding to a linear corrosion rate of 64 nm/yr. The reaction rate decreases with time. The smallest value obtained after 330 days is 0.3 mmol/m2yr corresponding to 1.5 nm/yr.The influence on iron of the saturated calcium hydroxide solution and the calcic porewater solutions differs from that of the alkali hydroxide solutions. At pH 12.5 the hydrogen generation rate remains practically constant up to breaking off the experiment, the value being about 1 mmol/m2yr corresponding to 5 nm/yr.
Notes:
Im Zusammenhang mit der Gasentwicklung in einem Endlager für schwach- und mittelradioaktive Abfälle ist die Wasserstoffentwicklung am passiven Eisen in verdünnten Alkalihydroxidlösungen, in gesättigter Calciumhydroxidlösung und in synthetischen Zementporenwässern bestimmt worden. Die Messung erfolgte manometrisch in zugeschmolzenen Glaszellen; die Meßzeiten lagen zwischen 275 und 560 Tagen.In 0,1 und 0,04 M Alkalihydroxidlösungen beträgt die anfängliche Wasserstoffbildungsrate 12 mmol/m2a (entsprechend einem Materialabtrag von 64 nm/a). Korrosionsgeschwindigkeiten in diesem Bereich wurden von anderen Autoren auch elektrochemisch gemessen. Die Reaktionsgeschwindigkeit nimmt mit der Zeit ab. Der kleinste gemessene Wert liegt nach 330 Tagen bei 0,3 mmol/m2a (1,5 nm/a).Gesättigte Calciumhydroxidlösung und die calciumhaltigen Zementporenwässer unterscheiden sich in ihrer Einwirkung auf das Eisen von den Alkalihydroxidlösungen. Bei pH 12,5 ist die Wasserstoffbildungsrate mit etwa 1 mmol/m2a (5 nm/a) bis zum Versuchsabbruch praktisch konstant.
Additional Material:
5 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19910421205
Permalink