ISSN:
1573-4889
Keywords:
Fe–Cr–Al alloy
;
oxidation
;
molybdenum
;
breakaway oxidation
;
transformation
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract Thin foils of Fe–20Cr–5Al alloys are susceptible to breakawayoxidation once the aluminum content of the substrate has fallen below somecritical value. The combined addition of 0.1 wt.% lanthanum and 0, 1, or 2wt% molybdenum has a beneficial effect on the high-temperature oxidation ofsuch foils. Lanthanum has the well-known reactive-element effect on adhesionof the protective alumina scale, thereby increasing the time to onset ofbreakaway oxidation, while, for alloys containing molybdenum, breakawayoxide spreads relatively slowly over the specimen in comparison to alloysthat contain no molybdenum. In particular, molybdenum-containing alloys areable to develop a protective Cr2O3 layer at the breakawayoxide–substrate interface. Conversely, molybdenum-free alloys form aninternal-oxide zone in the substrate adjacent to this interface, rather thana Cr2O3 layer, so breakaway oxide spreads rapidly. A martensitic phase isobserved in the substrate adjacent to the breakaway oxide formed on Fe–20Cr–5Al–La specimens, which means that theα-phase has transferred to the γ -phase at the temperature ofthe oxidation test (1150°C). Conversely, α-phase is retained inthe molybdenum-containing alloy, even after breakaway takes place, sincemolybdenum, which is a strong ferrite former, is enriched in the alloyadjacent to areas of breakaway oxide. The diffusion rate of chromium isslower in the γ than in the α-phase so a continuouschromium-rich oxide layer, which is effective in inhibiting breakawayoxide from spreading, cannot be established at the breakawayoxide–substrate interface for the molybdenum-free alloys.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1023/A:1004689211302
Permalink
