Bibliothek

Beschreibung: We consider an optimal control problem from hyperthermia treatment planning and its barrier regularization. We derive basic results, which lay the groundwork for the computation of optimal solutions via an interior point path-following method. Further, we report on a numerical implementation of such a method and its performance at an example problem.

Beschreibung: Optical technologies are ubiquitously used in hi-tech devices. As a common feature of such devices one finds structures with dimensions in the order of the wavelength of the used light. To design and produce such devices, the wave nature of light must be taken into account. Accordingly, robust simulation tools are required which are based on rigorously solving Maxwell's equations, the governing equations of light propagation within macroscopic media. This thesis contributes to the modeling and the numerical computation of light scattering problems: Light scattering problems are typically posed on the entire space. The Perfectly-Matched -Layer method (PML) is widely used to restrict the simulation problem onto a bounded computational domain. We propose an adaptive PML method which exhibits a good convergence even for critical problems where standard PML implementations fail. Besides the computation of the near field, that is the electromagnetic field within the computational domain, it is of major interest to evaluate the electromagnetic field in the exterior domain and to compute the far field. So far, this was numerically only possible for simple geometries such as homogeneous exterior domains or layered media. To deal with more complicated devices, for example with waveguide inhomogeneities, we develop an evaluation formula based on the PML solution which allows for an exterior domain field evaluation in a half space above the device. Finally, we generalize the PML method to problems with multiply structured exterior domains. The term “multiply structured exterior domain” is defined in this thesis and means that the exterior domain exhibits several half-infinite structures. Mathematically, this gives rise to various complications. For example, no analytical solutions to Maxwell's equations for standard light sources are available in the exterior domain, which are needed to describe the incoming field in a light scattering problem. To tackle this we propose a new light scattering problem formulation which fits well into the PML method framework and which may be regarded as an extension of classical contributions by Sommerfeld, Wiener and Hopf. An exterior domain evaluation formula for multiply structured exterior domains with an extended illumination is derived as well.

Beschreibung: We introduce the coolest path problem, which is a mixture of two well-known problems from distinct mathematical fields. One of them is the shortest path problem from combinatorial optimization. The other is the heat conduction problem from the field of partial differential equations. Together, they make up a control problem, where some geometrical object traverses a digraph in an optimal way, with constraints on intermediate or the final state. We discuss some properties of the problem and present numerical solution techniques. We demonstrate that the problem can be formulated as a linear mixed-integer program. Numerical solutions can thus be achieved within one hour for instances with up to 70 nodes in the graph.

Beschreibung: Given a general mixed integer program (MIP), we automatically detect block structures in the constraint matrix together with the coupling by capacity constraints arising from multi-commodity-flow formulations. We identify the underlying graph and generate cutting planes based on cuts in the detected network. Our implementation adds a separator to the branch-and-cut libraries of SCIP and CPLEX. We make use of the complemented mixed integer rounding framework (cMIR) but provide a special purpose aggregation heuristic that exploits the network structure. Our separation scheme speeds-up the computation for a large set of MIPs coming from network design problems by a factor of two on average.

Beschreibung: Executing applications in the Grid often requires access to multiple geographically distributed resources. In a Grid environment, these resources belong to different administrative domains, each employing its own scheduling policy. That is, at which time an activity (e.g., compute job, data transfer) is started, is decided by the resource's local management system. In such an environment, the coordinated execution of distributed applications requires guarantees on the quality of service (QoS) of the needed resources. Reserving resources in advance is an accepted means to obtain QoS guarantees from a single provider. The challenge, however, is to coordinate advance reservations of multiple resources. This work presents a system architecture and mechanisms to coordinate multiple advance reservations -- called co-reservations -- for delivering QoS guarantees to complex applications. We formally define the co-reservation problem as an optimization problem. The presented model supports three dimensions of freedom: the start time, the duration and the service level of a reservation. Requests and resources are described in a simple language. After matching the static properties and requirements of either side in a mapping, the reservation mechanism probes information about the future status of the resources. The versatile design of the probing step allows the efficient processing of requests, but also lets the resources express their preferences among the myriads of reservation candidates. Next, the best mapping is found through an implementation of the formal co-reservation model. Then, the mapping has to be secured, i.e., resources need to be allocated to a co-reservation candidate with all-or-nothing semantics. We study several goal-driven sequential and concurrent allocation mechanisms and define schemes for handling allocation failures. Finally, we introduce the concept of virtual resources for seamlessly embedding co-reservations into Grid resource management.

Beschreibung: Die Ausführung von Anwendungen erfordert oft mehrere, geographisch verteilte Ressourcen. In Grid-Umgebungen gehören diese Ressourcen zu verschiedenen administrativen Organisationen, wobei jede ihre eigene Schedulingregeln verwendet. Das bedeutet, zu welcher Zeit eine Aktivität gestartet wird (z.B. ein Rechenjob), wird vom lokalen Ressourcenmanagementsystem entschieden. Die koordinierte Ausführung von verteilten Anwendungen erfordert Dienstgütegarantien für die benötigten Ressourcen. Das Reservieren von Ressourcen im Voraus ist ein Mittel, um Dienstgütegarantien von einem einzelnen Ressourcenanbieter zu erhalten. Die Herausforderung in dieser Arbeit ist, Vorausreservierungen von mehreren Ressourcen zu koordinieren. Es wird ein System für die Koordinierung mehrerer Vorausreservierungen -- Co-Reservierungen genannt -- für die Bereitstellung von Dienstgütegarantien vorgestellt. Wir definieren das Co-Reservierungsproblem als Optimierungsproblem. Das vorgestellte Modell unterstützt drei Freiheitsgrade: die Startzeit, die Dauer und die Dienstgüte einer Reservierung. Anfragen und Ressourcen werden in einer einfachen Sprache beschrieben. Nachdem statische Eigenschaften und Anforderungen beider Seiten überprüft wurden, ermittelt der Reservierungsmechanismus Informationen über den zukünftigen Zustand der Ressourcen. Dieser Schritt ist so allgemein gehalten, daß er sowohl ein effizientes Bearbeiten der Anfragen erlaubt als auch den Ressourcen ermöglicht ihre Präferenzen auszudrücken. Im Anschluss wird die optimale Zuweisung von Anfragen zu Ressourcen ermittelt. Im letzten Schritt muss diese Zuweisung umgesetzt werden, d.h., entweder alle oder keine Ressource wird allokiert. Es werden mehrere sequentielle und parallele Allokationsverfahren vorgestellt sowie deren Auswirkung auf verschiedene Metriken untersucht. Die Einbettung von Co-Reservierungen in das Grid-Ressourcenmanagement wird anhand des Konzeptes der virtuellen Ressource dargestellt.

Beschreibung: In this paper we revisit the a priori turbulent flame speed tabulation (TFST) technique for a given parameter space within the region of flamelet combustion-regimes. It can be used as a subgrid-scale (SGS) model in Large Eddy Simulation (LES). In a first step, stationary laminar flamelets are computed and stored over the progress variable following the ideas of flamelet generated manifolds (FGM). In a second step, the incompressible one-dimensional Navier-Stokes equations supplemented by the equation for the progress variable are solved on a grid that resolves all turbulent scales. Additionally, turbulent transport is implemented via the linear eddy model (LEM). The turbulent flame structures are solved until a statistically stationary mean value of the turbulent flame speed has been reached. The results are stored in a table that could be used by large scale premixed combustion models, e.g. front tracking schemes. First results are compared quantitatively with direct numerical simulations (DNS) taken from literature. Then it is illustrated in one example how the new method could help to fix constants in algebraic models for turbulent flame speeds. Further it is shown how the technique can be extended to incorporate turbulent strain effects. Finally we investigate the effect of the use of detailed and tabulated chemistry under unsteady conditions.

Beschreibung: Pseudo-Boolean problems lie on the border between satisfiability problems, constraint programming, and integer programming. In particular, nonlinear constraints in pseudo-Boolean optimization can be handled by methods arising in these different fields: One can either linearize them and work on a linear programming relaxation or one can treat them directly by propagation. In this paper, we investigate the individual strengths of these approaches and compare their computational performance. Furthermore, we integrate these techniques into a branch-and-cut-and-propagate framework, resulting in an efficient nonlinear pseudo-Boolean solver.

Beschreibung: The Steiner connectivity problem is a generalization of the Steiner tree problem. It consists in finding a minimum cost set of simple paths to connect a subset of nodes in an undirected graph. We show that polyhedral and algorithmic results on the Steiner tree problem carry over to the Steiner connectivity problem, namely, the Steiner cut and the Steiner partition inequalities, as well as the associated polynomial time separation algorithms, can be generalized. Similar to the Steiner tree case, a directed formulation, which is stronger than the natural undirected one, plays a central role.

Beschreibung: Every day, millions of people are transported by buses, trains, and airplanes in Germany. Public transit (PT) is of major importance for the quality of life of individuals as well as the productivity of entire regions. Quality and efficiency of PT systems depend on the political framework (state-run, market oriented) and the suitability of the infrastructure (railway tracks, airport locations), the existing level of service (timetable, flight schedule), the use of adequate technologies (information, control, and booking systems), and the best possible deployment of equipment and resources (energy, vehicles, crews). The decision, planning, and optimization problems arising in this context are often gigantic and “scream” for mathematical support because of their complexity. This article sketches the state and the relevance of mathematics in planning and operating public transit, describes today’s challenges, and suggests a number of innovative actions. The current contribution of mathematics to public transit is — depending on the transportation mode — of varying depth. Air traffic is already well supported by mathematics. Bus traffic made significant advances in recent years, while rail traffic still bears significant opportunities for improvements. In all areas of public transit, the existing potentials are far from being exhausted. For some PT problems, such as vehicle and crew scheduling in bus and air traffic, excellent mathematical tools are not only available, but used in many places. In other areas, such as rolling stock rostering in rail traffic, the performance of the existing mathematical algorithms is not yet sufficient. Some topics are essentially untouched from a mathematical point of view; e.g., there are (except for air traffic) no network design or fare planning models of practical relevance. PT infrastructure construction is essentially devoid of mathematics, even though enormous capital investments are made in this area. These problems lead to questions that can only be tackled by engineers, economists, politicians, and mathematicians in a joint effort. Among other things, the authors propose to investigate two specific topics, which can be addressed at short notice, are of fundamental importance not only for the area of traffic planning, should lead to a significant improvement in the collaboration of all involved parties, and, if successful, will be of real value for companies and customers: • discrete optimal control: real-time re-planning of traffic systems in case of disruptions, • model integration: service design in bus and rail traffic. Work on these topics in interdisciplinary research projects could be funded by the German ministry of research and education (BMBF), the German ministry of economics (BMWi), or the German science foundation (DFG).

Beschreibung: The steel mill slab design problem from the CSPLib is a binpacking problem that is motivated by an application of the steel industry and that has been widely studied in the constraint programming community. Recently, several people proposed new models and methods to solve this problem. A steel mill slab library was created which contains 380 instances. A closely related binpacking problem called multiple knapsack problem with color constraints, originated from the same industrial problem, were discussed in the integer programming community. In particular, a simple integer programming for this problem has been given by Forrest et al. [3]. The aim of this paper is to bring these different studies together. Moreover, we adopt the model of [3] for the steel mill slab problem. Using a state of the art integer program solver, this model is capable to solve all instances of the steel mill slab library, mostly in less than one second, to optimality. We improved, thereby, the solution value of 76 instances.

Beschreibung: Nowadays most data networks use shortest path protocols such as OSPF or IS-IS to route traffic. Given administrative routing lengths for the links of a network, all data packets are sent along shortest paths with respect to these lengths from their source to their destination. One of the most fundamental problems in planning shortest path networks is to decide whether a given set of routing paths forms a valid routing and, if this is not the case, to find a small subset of the given paths that cannot be shortest paths simultaneously for any routing lengths. In this paper we show that it is NP-hard to approximate the size of the smallest shortest path conflict by a factor less than 7/6.

Beschreibung: The Vehicle Positioning Problem (VPP) consists of the assignment of vehicles (buses, trams or trains) of a public transport or railway company to parking positions in a depot and to timetabled trips. Such companies have many different types of vehicles, and each trip can be performed only by vehicles of some of these types. These assignments are non-trivial due to the topology of depots. The parking positions are organized in tracks, which work as one- or two-sided stacks or queues. If a required type of vehicle is not available in the front of any track, shunting movements must be performed in order to change vehicles' positions, which is undesirable and should be avoided. In this text we present integer linear and non-linear programming formulations for some versions of the problem and compare them from a theoretical and a computational point of view.

Beschreibung: The understanding of geometric structures and dynamical properties of molecular conformations gives insight into molecular long-term behavior. The identification of metastable conformations together with their life times and transition patterns is the intention of conformation dynamics. Conformation dynamics is a multi-scale approach that leads to a reduced description of the dynamical system in terms of a stochastic transition probability matrix. The present thesis deals with the error analysis of computed matrices and the resulting matrix functions. Since conformational membership vectors, as they are computed by the Robust Perron Cluster Analysis (PCCA+), form an invariant subspace of the transition matrix, subspace-based error estimators are of particular interest. The decomposition of the state space into basis functions and the approximation of integrals by Monte-Carlo quadrature give rise to row-wise correlated random matrices, for which stochastic norms are computed. Together with an appropriate statistical model for the distribution of matrix rows, this allows for the calculation of error bounds and error distributions of the invariant subspace and other variables of interest. Equilibration of errors among the basis functions can be achieved by enhanced sampling in regions where the trajectories are mixing slowly. Hierarchical refinement of such basis functions systematically improves the clustering into metastable conformations by reducing the error in the corresponding invariant subspace. These techniques allow for an evaluation of simulation results and pave the way for the analysis of larger molecules. Moreover, the extension of PCCA+ to non-reversible Markov chains, verified by the corresponding perturbation theory, and the modification of the objective function for the case of soft membership vectors represent a further generalization of the clustering method, thus continuing the development from PCCA over PCCA+ to PCCA++. The methods developed in this thesis are useful for but not limited to conformation dynamics. In fact, they are applicable to a broader class of problems which combine domain decomposition with Monte-Carlo quadrature. Possible application areas may include the chemical master equation or quantum dynamical systems.

Beschreibung: Das Verständnis von geometrischen Strukturen und dynamischen Eigenschaften molekularer Konformationen ist essentiell für die Vorhersage des Langzeitverhaltens von Molekülen. Die Identifikation metastabiler Konformationen sowie die Bestimmung von Übergangswahrscheinlichkeiten und Haltezeiten sind Bestandteil der Konformationdynamik. Dabei handelt es sich um eine Mehrskalenmethode, die auf eine reduzierte Beschreibung des Systems mittels einer stochastischen Übergangsmatrix führt. In der vorliegenden Dissertation wurde untersucht, wie man die Genauigkeit der Matrizen sowie der daraus berechneten Größen quantifizieren kann. Im Mittelpunkt stehen dabei Fehlerschätzer für den invarianten Unterraum, da die rechten Eigenvektoren als Grundlage der Robusten Perron Cluster Analyse (PCCA+) zur Identifizierung der metastabilen Konformationen dienen. Die Zerlegung des Zustandsraumes in Basisfunktionen sowie die Approximation der Matrixeinträge mittels Monte-Carlo-Quadratur führen zu zeilenweise korrelierten Zufallsmatrizen. Mit Hilfe einer stochastischen Norm sowie einem geeigneten statistischen Modell für die Verteilung der Matrixzeilen können u.a. Fehlerschranken und -verteilungen für den invarianten Unterraum brechnet werden. Eine Equilibrierung des Fehlers zwischen den Basisfunktionen kann durch erweitertes Sampling in solchen Regionen erreicht werden, in denen die Trajektorien nur langsam mischen.Eine hierarchische Zerlegung dieser Basisfunktionen verbessert systematisch die Zerlegung in metastabile Konformationen, indem sie den Fehler im invarianten Unterraum reduziert. Diese Techniken gestatten eine Evaluierung der Simulationsergebnisse und ebnen den Weg zur Behandlung komplexerer Moleküle. Desweiteren wurden Verallgemeinerungen der PCCA+ untersucht. Die Erweiterung der PCCA+ auf nicht-reversible Markov-Ketten sowie die Modifizierung der Zielfunktion für den Fall der weichen Clusterung setzen die Entwicklung von der PCCA über PCCA+ zu PCCA++ fort. Somit können neue Anwendungsfelder für dieses Cluster-Verfahren erschlossen werden. Die Methoden wurden zwar in Rahmen der Konformationsdynamik entwickelt, jedoch lassen sie sich auf eine weite Problemklasse anwenden, in der Gebietszerlegungsverfahren mit Monte-Carlo-Quadratur kombiniert werden. Mögliche Anwendungsgebiete umfassen die chemische Master-Gleichung oder quantenchemische Systeme.

Beschreibung: We give the basic definitions and some theoretical results about hyperdeterminants, introduced by A.~Cayley in 1845. We prove integrability (understood as $4d$-consistency) of a nonlinear difference equation defined by the $2 \times 2 \times 2$ - hyperdeterminant. This result gives rise to the following hypothesis: the difference equations defined by hyperdeterminants of any size are integrable. We show that this hypothesis already fails in the case of the $2\times 2\times 2\times 2$ - hyperdeterminant.

Beschreibung: A world-wide used program for the simulation of fire-induced flows is the Fire Dynamics Simulator (FDS) which originally was developed for a purely serial execution on single-processor computing systems. Due to steadily increasing problem sizes and accuracy requirements as well as restrictions in storage capacity and computing power on single-processor systems, the efficient simulation of the considered fire scenarios can only be achieved on modern high-performance systems based on multi-processor architectures. The transition to those systems requires the elaborate parallelization of the underlying numerical methods which must guarantee the same result for a given problem as the corresponding serial execution. Unfortunately, one fundamental serial serial solver of FDS, the pressure solver, only possesses a low degree of inherent parallelizm. Its current parallelization may cause additional numerical errors, casually leading to significant losses of accuracy or even numerical instabilities. In order to ensure that the parallelization errors are limited by the leading error of the numerical scheme such that second order convergence for the whole method can be acchieved, optimized parallelization concepts must be designed. With respect to these considerations this articles gives an overview of the current parallel pressure solver as well as the problems related to it and presents an alternative method, SCARC, to overcome the existing complicacies. Part I explains the theory, concept and implementation of this new strategy, whereas Part II describes a series of validation and verification tests to proof its correctness.

Beschreibung: Because CFD programs, like FDS, generally consist of a large number of different components representing the variety of participating numerical algorithms and chemical / physical processes, it is nearly impossible to verify such codes in their entirety, for example with comparisons of fire tests. Instead, a careful verification and validation with respect to the underlying mathematical conditions and applied numerical schemes is indispensable. In particular, error cancelations between single program components can only be detected by such detailed component-level tests. In part I of this article series a conceptual deficiency of the FDS program package with regard to multi-mesh computations was illustrated and an alternative domain decomposition strategy FDS-ScaRC was introduced. In this second part we will present the structure of a comprehensive test concept and the needs for a more mathematically and numerically orientated test procedure that is much more suited for a reliable evaluation than only a simple visual comparison of the numerical results with experimental fire tests. After a general introduction of our test concept we will demonstrate the high potential of the new FDS-\scarc{} technique compared to the FDS-FFT technique which is used in the FDS program package as yet. Based on this concept, we will present a comprehensive set of analytical and numerical test results.

Beschreibung: The Vehicle Positioning Problem (VPP) is a classical combinatorial optimization problem in public transport planning. A number of models and approaches have been suggested in the literature, which work for small problems, but not for large ones. We propose in this article a novel set partitioning model and an associated column generation solution approach for the VPP. The model provides a tight linear description of the problem. The pricing problem, and hence the LP relaxation itself, can be solved in polynomial resp. pseudo-polynomial time for some versions of the problems.

Beschreibung: Since the initial application of mathematical optimisation methods to mine planning in 1965, the Lerchs-Grossmann algorithm for computing the ultimate pit limit, operations researchers have worked on a variety of challenging problems in the area of open pit mining. This thesis focuses on the open pit mining production scheduling problem: Given the discretisation of an orebody as a block model, determine the sequence in which the blocks should be removed from the pit, over the lifespan of the mine, such that the net present value of the mining operation is maximised. In practise, when some material has been removed from the pit, it must be processed further in order to extract the valuable elements contained therein. If the concentration of valuable elements is not sufficiently high, the material is discarded as waste or stockpiled. Realistically-sized block models can contain hundreds of thousands of blocks. A common approach to render these problem instances computationally tractable is the aggregation of blocks to larger scheduling units. The thrust of this thesis is the investigation of a new mixed-integer programming formulation for the open pit mining production scheduling problem, which allows for processing decisions to be made at block level, while the actual mining schedule is still computed at aggregate level. A drawback of this model in its full form is the large number of additional variables needed to model the processing decisions. One main result of this thesis shows how these processing variables can be aggregated efficiently to reduce the problem size significantly, while practically incurring no loss in net present value. The second focus is on the application of lagrangean relaxation to the resource constraints. Using a result of Möhring et al. (2003) for project scheduling, the lagrangean relaxation can be solved efficiently via minimum cut computations in a weighted digraph. Experiments with a bundle algorithm implementation by Helmberg showed how the lagrangean dual can be solved within a small fraction of the time required by standard linear programming algorithms, while yielding practically the same dual bound. Finally, several problem-specific heuristics are presented together with computational results: two greedy sub-MIP start heuristics and a large neighbourhood search heuristic. A combination of a lagrangean-based start heuristic followed by a large neighbourhood search proved to be effective in generating solutions with objective values within a 0.05% gap of the optimum.

Beschreibung: Starting from the conservation laws for mass, momentum and energy together with a three species, bulk microphysic model, a model for the interaction of internal gravity waves and deep convective hot towers is derived by using multiscale asymptotic techniques. From the resulting leading order equations, a closed model is obtained by applying weighted averages to the smallscale hot towers without requiring further closure approximations. The resulting model is an extension of the linear, anelastic equations, into which moisture enters as the area fraction of saturated regions on the microscale with two way coupling between the large and small scale. Moisture reduces the effective stability in the model and defines a potential temperature sourceterm related to the net effect of latent heat release or consumption by microscale up- and downdrafts. The dispersion relation and group velocity of the system is analyzed and moisture is found to have several effects: It reduces energy transport by waves, increases the vertical wavenumber but decreases the slope at which wave packets travel and it introduces a lower horizontal cutoff wavenumber, below which modes turn into evanescent. Further, moisture can cause critical layers. Numerical examples for steadystate and timedependent mountain waves are shown and the effects of moisture on these waves are investigated.