Library

Description: While graph covering is a fundamental and well-studied problem, this field lacks a broad and unified literature review. The holistic overview of graph covering given in this article attempts to close this gap. The focus lies on a characterization and classification of the different problems discussed in the literature. In addition, notable results and common approaches are also included. Whenever appropriate, this review extends to the corresponding partitioning problems.

Description: We present an optimization model which is capable of routing and ordering trains on a microscopic level under a moving block regime. Based on a general timetabling definition (GTTP) that allows the plug in of arbitrarily detailed methods to compute running and headway times, we describe a layered graph approach using velocity expansion, and develop a mixed integer linear programming formulation. Finally, we present promising results for a German corridor scenario with mixed traffic, indicating that applying branch-and-cut to our model is able to solve reasonably sized instances with up to hundred trains to optimality.

Description: We propose a new mixed integer programming based heuristic for computing new benchmark primal solutions for instances of the PESPlib. The PESPlib is a collection of instances for the Periodic Event Scheduling Problem (PESP), comprising periodic timetabling problems inspired by real-world railway timetabling settings, and attracting several international research teams during the last years. We describe two strategies to merge a set of good periodic timetables. These make use of the instance structure and minimum weight cycle bases, finally leading to restricted mixed integer programming formulations with tighter variable bounds. Implementing this timetable merging approach in a concurrent solver, we improve the objective values of the best known solutions for the smallest and largest PESPlib instances by 1.7 and 4.3 percent, respectively.

Description: The Periodic Event Scheduling Problem (PESP) is the standard mathematical tool for optimizing periodic timetabling problems in public transport. A solution to PESP consists of three parts: a periodic timetable, a periodic tension, and integer periodic offset values. While the space of periodic tension has received much attention in the past, we explore geometric properties of the other two components, establishing novel connections between periodic timetabling and discrete geometry. Firstly, we study the space of feasible periodic timetables, and decompose it into polytropes, i.e., polytopes that are convex both classically and in the sense of tropical geometry. We then study this decomposition and use it to outline a new heuristic for PESP, based on the tropical neighbourhood of the polytropes. Secondly, we recognize that the space of fractional cycle offsets is in fact a zonotope. We relate its zonotopal tilings back to the hyperrectangle of fractional periodic tensions and to the tropical neighbourhood of the periodic timetable space. To conclude we also use this new understanding to give tight lower bounds on the minimum width of an integral cycle basis.

Description: Optimizing the transient control of gas networks is a highly challenging task. The corresponding model incorporates the combinatorial complexity of determining the settings for the many active elements as well as the non-linear and non-convex nature of the physical and technical principles of gas transport. In this paper, we present the latest improvements of our ongoing work to solve this problem for real-world, large-scale problem instances: By adjusting our mixed-integer non-linear programming model regarding the gas compression capabilities in the network, we reflect the technical limits of the underlying units more accurately while maintaining a similar overall model size. In addition, we introduce a new algorithmic approach that is based on splitting the complexity of the problem by first finding assignments for discrete variables and then determining the continuous variables as locally optimal solution of the corresponding non-linear program. For the first task, we design multiple different heuristics based on concepts for general time-expanded optimization problems that find solutions by solving a sequence of sub-problems defined on reduced time horizons. To demonstrate the competitiveness of our approach, we test our algorithm on particularly challenging historic demand scenarios. The results show that high-quality solutions are obtained reliably within short solving times, making the algorithm well-suited to be applied at the core of time-critical industrial applications.

Description: Public transportation networks are typically operated with a periodic timetable. The periodic event scheduling problem (PESP) is the standard mathematical modeling tool for periodic timetabling. PESP is a computationally very challenging problem: For example, solving the instances of the benchmarking library PESPlib to optimality seems out of reach. Since PESP can be solved in linear time on trees, and the treewidth is a rather small graph parameter in the networks of the PESPlib, it is a natural question to ask whether there are polynomial-time algorithms for input networks of bounded treewidth, or even better, fixed-parameter tractable algorithms. We show that deciding the feasibility of a PESP instance is NP-hard even when the treewidth is 2, the branchwidth is 2, or the carvingwidth is 3. Analogous results hold for the optimization of reduced PESP instances, where the feasibility problem is trivial. Moreover, we show W[1]-hardness of the general feasibility problem with respect to treewidth, which means that we can most likely only accomplish pseudo-polynomial-time algorithms on input networks with bounded tree- or branchwidth. We present two such algorithms based on dynamic programming. We further analyze the parameterized complexity of PESP with bounded cyclomatic number, diameter, or vertex cover number. For event-activity networks with a special—but standard—structure, we give explicit and sharp bounds on the branchwidth in terms of the maximum degree and the carvingwidth of an underlying line network. Finally, we investigate several parameters on the smallest instance of the benchmarking library PESPlib.

Description: Cut selection is a subroutine used in all modern mixed-integer linear programming solvers with the goal of selecting a subset of generated cuts that induce optimal solver performance. These solvers have millions of parameter combinations, and so are excellent candidates for parameter tuning. Cut selection scoring rules are usually weighted sums of different measurements, where the weights are parameters. We present a parametric family of mixed-integer linear programs together with infinitely many family-wide valid cuts. Some of these cuts can induce integer optimal solutions directly after being applied, while others fail to do so even if an infinite amount are applied. We show for a specific cut selection rule, that any finite grid search of the parameter space will always miss all parameter values, which select integer optimal inducing cuts in an infinite amount of our problems. We propose a variation on the design of existing graph convolutional neural networks, adapting them to learn cut selection rule parameters. We present a reinforcement learning framework for selecting cuts, and train our design using said framework over MIPLIB 2017. Our framework and design show that adaptive cut selection does substantially improve performance over a diverse set of instances, but that finding a single function describing such a rule is difficult. Code for reproducing all experiments is available at https://github.com/Opt-Mucca/Adaptive-Cutsel-MILP.

Description: Secure energy transport is considered as highly relevant for the basic infrastructure of nowadays society and economy. To satisfy increasing demands and to handle more diverse transport situations, operators of energy networks regularly expand the capacity of their network by building new network elements, known as the expansion planning problem. A key constraint function in expansion planning problems is a nonlinear and nonconvex potential loss function. In order to improve the algorithmic performance of state-of-the-art MINLP solvers, this paper presents an algebraic description for the convex envelope of this function. Through a thorough computational study, we show that this tighter relaxation tremendously improves the performance of the MINLP solver SCIP on a large test set of practically relevant instances for the expansion planning problem. In particular, the results show that our achievements lead to an improvement of the solver performance for a development version by up to 58%.

Description: It is well known as the Kelvin-Helmholtz instability (KHI) that an interface of tangential velocity discontinuity is necessarily unstable, regardless of the velocity difference's strength. However, the KHI is suppressed for shallow water flows if the Froude number, defined by the ratio of the velocity difference to the gravity wave's speed, is sufficiently large. In this investigation, we examine the effect of the depth difference of two fluid layers on the KHI. The depth difference enhances instability. Given the Froude number in the instability range, the growth rate sensitively depends on the depth ratio and increases monotonically with the depth ratio difference from unity. The critical value of the Froude number for stabilization varies with the depth ratio and attains the minimum value √8 for equal depth. This behavior is verified by asymptotic analysis.

Description: The European energy system has been through a fundamental transformation since the Paris Agreement to reduce greenhouse gas emissions. The transition involves several energy-generating and consuming sectors emphasizing sector coupling. The increase in the share of renewable energy sources has revealed the need for flexibility in the electri city grid. Thus, holistic planning of pathways towards decarbonized energy systems also involves assessing the gas infrastructure to provide such a flexibility and support for the security of supply. In this paper, we propose a workflow to investigate such optimal energy transition pathways considering sector coupling. This workflow involves an integrated operational analysis of the electricity market, its transmission grid, and the gas grid in high spatio-temporal resolution. In a case study on a pan-European scale between 2020-2050, we show that carbon neutrality can be reached within feasible additional costs and in time. However, the manifestation of the potential pathways strongly depends on political and technological constraints. Sector coupling acts as an enabler of cross-border cooperation to achieve both, decarbonization and security of supply.

Description: Biological armors derive their mechanical integrity in part from their geometric architectures, often involving tessellations: individual structural elements tiled together to form surface shells. The carapace of boxfish, for example, is comprised of mineralized polygonal plates, called scutes, arranged in a complex geometric pattern and nearly completely encasing the body. In contrast to artificial armors, the boxfish exoskeleton grows with the fish; the relationship between the tessellation and the gross structure of the armor is therefore critical to sustained protection throughout growth. To clarify whether or how the boxfish tessellation is maintained or altered with age, we quantify architectural aspects of the tessellated carapace of the longhorn cowfish Lactoria cornuta through ontogeny (across nearly an order of magnitude in standard length) and in a high-throughput fashion, using high-resolution microCT data and segmentation algorithms to characterize the hundreds of scutes that cover each individual. We show that carapace growth is canalized with little variability across individuals: rather than continually adding scutes to enlarge the carapace surface, the number of scutes is surprisingly constant, with scutes increasing in volume, thickness, and especially width with age. As cowfish and their scutes grow, scutes become comparatively thinner, with the scutes at the edges (weak points in a boxy architecture) being some of the thickest and most reinforced in younger animals and thinning most slowly across ontogeny. In contrast, smaller scutes with more variable curvature were found in the limited areas of more complex topology (e.g. around fin insertions, mouth, and anus). Measurements of Gaussian and mean curvature illustrate that cowfish are essentially tessellated boxes throughout life: predominantly zero curvature surfaces comprised of mostly flat scutes, and with scutes with sharp bends used sparingly to form box edges. Since growth of a curved, tiled surface with a fixed number of tiles would require tile restructuring to accommodate the surface’s changing radius of curvature, our results therefore illustrate a previously unappreciated advantage of the odd boxfish morphology: by having predominantly flat surfaces, it is the box-like body form that in fact permits a relatively straightforward growth system of this tessellated architecture (i.e. where material is added to scute edges). Our characterization of the ontogeny and maintenance of the carapace tessellation provides insights into the potentially conflicting mechanical, geometric and developmental constraints of this species, but also perspectives into natural strategies for constructing mutable tiled architectures.

Description: The electric conductivity of cardiac tissue determines excitation propagation and is important for quantifying ischemia and scar tissue and for building personalized models. Estimating conductivity distributions from endocardial mapping data is a challenging inverse problem due to the computational complexity of the monodomain equation, which describes the cardiac excitation. For computing a maximum posterior estimate, we investigate different optimization approaches based on adjoint gradient computation: steepest descent, limited memory BFGS, and recursive multilevel trust region methods, which are using mesh hierarchies or heterogeneous model hierarchies. We compare overall performance, asymptotic convergence rate, and pre-asymptotic progress on selected examples in order to assess the benefit of our multifidelity acceleration.

Description: Tai256c is the largest unsolved quadratic assignment problem (QAP) instance in QAPLIB; a 1.48% gap remains between the best known feasible objective value and lower bound of the unknown optimal value. This paper shows that the instance can be converted into a 256 dimensional binary quadratic optimization problem (BQOP) with a single cardinality constraint which requires the sum of the binary variables to be 92.The converted BQOP is much simpler than the original QAP tai256c and it also inherits some of the symmetry properties. However, it is still very difficult to solve. We present an efficient branch and bound method for improving the lower bound effectively. A new lower bound with 1.36% gap is also provided.

Description: The combination of Monte Carlo methods and deep learning has recently led to efficient algorithms for solving partial differential equations (PDEs) in high dimensions. Related learning problems are often stated as variational formulations based on associated stochastic differential equations (SDEs), which allow the minimization of corresponding losses using gradient-based optimization methods. In respective numerical implementations it is therefore crucial to rely on adequate gradient estimators that exhibit low variance in order to reach convergence accurately and swiftly. In this article, we rigorously investigate corresponding numerical aspects that appear in the context of linear Kolmogorov PDEs. In particular, we systematically compare existing deep learning approaches and provide theoretical explanations for their performances. Subsequently, we suggest novel methods that can be shown to be more robust both theoretically and numerically, leading to substantial performance improvements.

Description: We establish a connection between stochastic optimal control and generative models based on stochastic differential equations (SDEs) such as recently developed diffusion probabilistic models. In particular, we derive a Hamilton-Jacobi-Bellman equation that governs the evolution of the log-densities of the underlying SDE marginals. This perspective allows to transfer methods from optimal control theory to generative modeling. First, we show that the evidence lower bound is a direct consequence of the well-known verification theorem from control theory. Further, we develop a novel diffusion-based method for sampling from unnormalized densities -- a problem frequently occurring in statistics and computational sciences.

Description: This study investigates the progress made in LP and MILP solver performance during the last two decades by comparing the solver software from the beginning of the millennium with the codes available today. On average, we found out that for solving LP/MILP, computer hardware got about 20 times faster, and the algorithms improved by a factor of about nine for LP and around 50 for MILP, which gives a total speed-up of about 180 and 1,000 times, respectively. However, these numbers have a very high variance and they considerably underestimate the progress made on the algorithmic side: many problem instances can nowadays be solved within seconds, which the old codes are not able to solve within any reasonable time.

Description: We study two related problems concerning the number of monochromatic cliques in two-colorings of the complete graph that go back to questions of Erdős. Most notably, we improve the 25-year-old upper bounds of Thomason on the Ramsey multiplicity of K4 and K5 and we settle the minimum number of independent sets of size 4 in graphs with clique number at most 4. Motivated by the elusiveness of the symmetric Ramsey multiplicity problem, we also introduce an off-diagonal variant and obtain tight results when counting monochromatic K4 or K5 in only one of the colors and triangles in the other. The extremal constructions for each problem turn out to be blow-ups of a finite graph and were found through search heuristics. They are complemented by lower bounds and stability results established using Flag Algebras, resulting in a fully computer-assisted approach. More broadly, these problems lead us to the study of the region of possible pairs of clique and independent set densities that can be realized as the limit of some sequence of graphs.

Description: The Periodic Event Scheduling Problem (PESP) is the central mathematical model behind the optimization of periodic timetables in public transport. We apply Benders decomposition to the incidence-based MIP formulation of PESP. The resulting formulation exhibits particularly nice features: The subproblem is a minimum cost network flow problem, and feasibility cuts are equivalent to the well-known cycle inequalities by Odijk. We integrate the Benders approach into a branch-and-cut framework, and assess the performance of this method on instances derived from the benchmarking library PESPlib.

Description: Periodic timetabling is a central aspect of both the long-term organization and the day-to-day operations of a public transportation system. The Periodic Event Scheduling Problem (PESP), the combinatorial optimization problem that forms the mathematical basis of periodic timetabling, is an extremely hard problem, for which optimal solutions are hardly ever found in practice. The most prominent solving strategies today are based on mixed-integer programming, and there is a concurrent PESP solver employing a wide range of heuristics [Borndörfer et al., 2020]. We present tropical neighborhood search (tns), a novel PESP heuristic. The method is based on the relations between periodic timetabling and tropical geometry [Bortoletto et al., 2022]. We implement tns into the concurrent solver, and test it on instances of the benchmarking library PESPlib. The inclusion of tns turns out to be quite beneficial to the solver: tns is able to escape local optima for the modulo network simplex algorithm, and the overall share of improvement coming from tns is substantial compared to the other methods available in the solver. Finally, we provide better primal bounds for five PESPlib instances.

Description: OASIcs, Volume 106, ATMOS 2022, Complete Volume

Description: Extracting information about dynamical systems from models learned off simulation data has become an increasingly important research topic in the natural and engineering sciences. Modeling the Koopman operator semigroup has played a central role in this context. As the approximation quality of any such model critically depends on the basis set, recent work has focused on deriving data-efficient representations of the Koopman operator in low-rank tensor formats, enabling the use of powerful model classes while avoiding over-fitting. On the other hand, detailed information about the system at hand can be extracted from models for the infinitesimal generator, also called Kolmogorov backward operator for stochastic differential equations. In this work, we present a data-driven method to efficiently approximate the generator using the tensor train (TT) format. The centerpiece of the method is a TT representation of the tensor of generator evaluations at all data sites. We analyze consistency and complexity of the method, present extensions to practically relevant settings, and demonstrate its applicability to benchmark numerical examples.

Description: Finding connected subgraphs of maximum weight subject to additional constraints on the subgraphs is a common (sub)problem in many applications. In this paper, we study the Maximum Weight Connected Subgraph Problem with a given root node and a lower and upper capacity constraint on the chosen subgraph. In addition, the nodes of the input graph are colored blue and red, and the chosen subgraph is required to be balanced regarding its cumulated blue and red weight. This problem arises as an essential subproblem in district planning applications. We show that the problem is NP-hard and give an integer programming formulation. By exploiting the capacity and balancing condition, we develop a powerful reduction technique that is able to significantly shrink the problem size. In addition, we propose a method to strengthen the LP relaxation of our formulation by identifying conflict pairs, i.e., nodes that cannot be both part of a chosen subgraph. Our computational study confirms the positive impact of the new preprocessing technique and of the proposed conflict cuts.

Description: We consider autocovariance operators of a stationary stochastic process on a Polish space that is embedded into a reproducing kernel Hilbert space. We investigate how empirical estimates of these operators converge along realizations of the process under various conditions. In particular, we examine ergodic and strongly mixing processes and obtain several asymptotic results as well as finite sample error bounds. We provide applications of our theory in terms of consistency results for kernel PCA with dependent data and the conditional mean embedding of transition probabilities. Finally, we use our approach to examine the nonparametric estimation of Markov transition operators and highlight how our theory can give a consistency analysis for a large family of spectral analysis methods including kernel-based dynamic mode decomposition.

Description: This work addresses the problem of determining the number of components from sequential spectroscopic data analyzed by non-negative matrix factorization without separability assumption (SepFree NMF). These data are stored in a matrix M of dimension “measured times” versus “measured wavenumbers” and can be decomposed to obtain the spectral fingerprints of the states and their evolution over time. SepFree NMF assumes a memoryless (Markovian) process to underline the dynamics and decomposes M so that M=WH, with W representing the components’ fingerprints and H their kinetics. However, the rank of this decomposition (i.e., the number of physical states in the process) has to be guessed from pre-existing knowledge on the observed process. We propose a measure for determining the number of components with the computation of the minimal memory effect resulting from the decomposition; by quantifying how much the obtained factorization is deviating from the Markovian property, we are able to score factorizations of a different number of components. In this way, we estimate the number of different entities which contribute to the observed system, and we can extract kinetic information without knowing the characteristic spectra of the single components. This manuscript provides the mathematical background as well as an analysis of computer generated and experimental sequentially measured Raman spectra.

Description: We consider the line planning problem in public transport in the Parametric City, an idealized model that captures typical scenarios by a (small) number of parameters. The Parametric City is rotation symmetric, but optimal line plans are not always symmetric. This raises the question to quantify the symmetry gap between the best symmetric and the overall best solution. For our analysis, we formulate the line planning problem as a mixed integer linear program, that can be solved in polynomial time if the solutions are forced to be symmetric. The symmetry gap is provably small when a specific Parametric City parameter is fixed, and we give an approximation algorithm for line planning in the Parametric City in this case. While the symmetry gap can be arbitrarily large in general, we show that symmetric line plans are a good choice in most practical situations.

Description: In this paper, we consider the eigenvalue PDE problem of the infinitesimal generators of metastable diffusion processes. We propose a numerical algorithm based on training artificial neural networks for solving the leading eigenvalues and eigenfunctions of such high-dimensional eigenvalue problem. The algorithm is useful in understanding the dynamical behaviors of metastable processes on large timescales. We demonstrate the capability of our algorithm on a high-dimensional model problem, and on the simple molecular system alanine dipeptide.

Description: We propose new Markov Chain Monte Carlo algorithms to sample probability distributions on submanifolds, which generalize previous methods by allowing the use of set-valued maps in the proposal step of the MCMC algorithms. The motivation for this generalization is that the numerical solvers used to project proposed moves to the submanifold of interest may find several solutions. We show that the new algorithms indeed sample the target probability measure correctly, thanks to some carefully enforced reversibility property. We demonstrate the interest of the new MCMC algorithms on illustrative numerical examples.

Description: As a result of the legislation for gas markets introduced by the European Union in 2005, separate independent companies have to conduct the transport and trading of natural gas. The current gas market of Germany, which has a market value of more than 54 billion USD, consists of Transmission System Operators (TSO), network users, and traders. Traders can nominate a certain amount of gas anytime and anywhere in the network. Such unrestricted access for the traders, on the other hand, increase the uncertainty in the gas supply management. Some customers’ behaviors may cause abrupt structural changes in gas flow time series. In particular, it is a challenging task for the TSO operators to predict gas nominations 6 to 10 h-ahead. In our study, we aim to investigate the regime changes in time series of nominations to predict the 6 to 10 h-ahead of gas nominations.

Description: During the apparition of comet 67P/Churyumov-Gerasimenko (67P/C-G) solar irradiation causes varying rates for sublimation of volatile species from the cometary nucleus. Because sublimation processes take place close to the cometary surface, the relative abundance of volatiles in the coma and the ice composition are related to each other. To quantify this relation we assume a model for the expansion of a collisionless gas from the surface into the surrounding space. We use an inverse model approach to relate the in situ measurements of gas densities from the two Rosetta instruments COPS (COmet Pressure Sensor) and DFMS (Double Focusing Mass Spectrometer) at the positions of the spacecraft to the locations of surface gas emissions during the Rosetta mission 2014-2016. We assume the temporally integrated gas emissions to be representative for the ice composition close to the surface. Our analysis shows characteristic differences in the ice compositions between both hemispheres of 67P/C-G. In particular CO2 ice has a reduced abundance on the northern hemisphere. In contrast to the hemispherical differences, the two lobes do not show significant differences in terms of their ice composition.

Description: The Rosetta mission to comet 67P/C-G provided a detailed view of the near nucleus environment of an active Jupiter family comet. The continuous monitoring of the gas pressure with the ROSINA experiment at the location of the Rosetta spacecraft in combination with the images of the dust environment acquired by the OSIRIS cameras allows one to test different hypotheses about the origin of the dust and gas emissions. In addition the orbital elements and the rotation axis and spin rate of the nucleus are affected by the gas release.

Description: The Moon as our nearest celestial object is one of the most important bodies for space resource exploration and planetary science. However, knowledge of the physical properties of the lunar regolith is required for the exploitation of lunar resources and for understanding the Moon's geologic history. This knowledge comes mainly from Apollo in-situ experiments and returned samples, but the global distribution of these properties is still poorly understood. Remote sensing measurements offer the opportunity to derive properties of unsampled areas with the help of models. In our study, a microphysical thermal model for the lunar regolith was developed and the simulated surface temperatures were compared with thermal emission measurements from the Diviner radiometer on board the Lunar Reconnaissance Orbiter (LRO) to derive regolith properties. This work expands upon previous investigations of lunar regolith properties using Diviner data, by more directly simulating physical properties such as particle size and porosity.

Description: Recently developed Concentric Tube Continuum Robots (CTCRs) are widely exploited in, for example in minimally invasive surgeries which involve navigating inside narrow body cavities close to sensitive regions. These CTCRs can be controlled by extending and rotating the tubes in order to reach a target point or perform some task. The robot must deviate as little as possible from this narrow space and avoid damaging neighbouring tissue. We consider \emph{open-loop} optimal control of CTCRs parameterized over pseudo-time, primarily aiming at minimizing the robot's working volume during its motion. External loads acting on the system like tip loads or contact with tissues are not considered here. We also discussed the inclusion of tip's orientation in the optimal framework to perform some tasks. We recall a quaternion-based formulation of the robot configuration, discuss discretization, develop optimization objectives addressing different criteria, and investigate their impact on robot path planning for several numerical examples. This optimal framework can be applied to any backbone based continuum robots.

Description: Image segmentation is an active area of research for more than 30 years. Traditional image segmentation algorithms are problem-specific and limited in scope. On the other hand, machine learning offers an alternative paradigm where predefined features are combined into different classifiers, providing pixel-level classification and segmentation. However, machine learning only can not address the question as to which features are appropriate for a certain classification problem. This paper presents a project supported in part by the International Neuroinformatics Coordination Facility through the Google Summer of code. The project resulted in an automated image segmentation and classification platform, called Active Segmentation for ImageJ (AS/IJ). The platform integrates a set of filters computing differential geometrical invariants and combines them with machine learning approaches.

Description: Agent-based epidemiological models have been applied widely successfully during the SARS-CoV-2 pandemic and assisted policymakers in assessing the effectiveness of intervention strategies. The computational complexity of agent-based models is still challenging, and therefore it is important to utilize modern multi-core systems as good as possible. In this paper, we are presenting our work on parallelizing the epidemiological simulation model MATSim Episim. Episim combines a large-scale person-centric human mobility model with a mechanistic model of infection and a person-centric disease progression model. In general, the parallelization of agent-based models with an inherent sequential structure — in the case of epidemiological models, the temporal order of the individual movements of the agents — is challenging. Especially when the underlying social network is irregular and dynamic, they require frequent communication between the processing elements. In Episim, however, we were able to take advantage of the fact that people are not contagious on the same day they become infected, and therefore immediate health synchronization is not required. By parallelizing some of the most computationally intensive submodels, we are now able to run MATSim Episim simulations up to eight times faster than the serial version. This makes it feasible to increase the number of agents, e.g. to run simulations for the whole of Germany instead of just Berlin as before.

Description: When dealing with Bayesian inference the choice of the prior often remains a debatable question. Empirical Bayes methods offer a data-driven solution to this problem by estimating the prior itself from an ensemble of data. In the nonparametric case, the maximum likelihood estimate is known to overfit the data, an issue that is commonly tackled by regularization. However, the majority of regularizations are ad hoc choices which lack invariance under reparametrization of the model and result in inconsistent estimates for equivalent models. We introduce a nonparametric, transformation-invariant estimator for the prior distribution. Being defined in terms of the missing information similar to the reference prior, it can be seen as an extension of the latter to the data-driven setting. This implies a natural interpretation as a trade-off between choosing the least informative prior and incorporating the information provided by the data, a symbiosis between the objective and empirical Bayes methodologies.

Description: It is well understood that Bayesian decision theory and average case analysis are essentially identical. However, if one is interested in performing uncertainty quantification for a numerical task, it can be argued that the decision-theoretic framework is neither appropriate nor sufficient. To this end, we consider an alternative optimality criterion from Bayesian experimental design and study its implied optimal information in the numerical context. This information is demonstrated to differ, in general, from the information that would be used in an average-case-optimal numerical method. The explicit connection to Bayesian experimental design suggests several distinct regimes in which optimal probabilistic numerical methods can be developed.

Description: This paper studies mixed-integer nonlinear programs featuring disjunctive constraints and trigonometric functions and presents a strengthened version of the Convex Quadratic relaxation of the Optimal Transmission Switching problem. We first characterize the convex hull of univariate quadratic on/off constraints in the space of original variables using perspective functions. We then introduce new tight quadratic relaxations for trigonometric functions featuring variables with asymmetrical bounds. These results are used to further tighten recent convex relaxations introduced for the Optimal Transmission Switching problem in Power Systems. Using the proposed improvements, along with bound propagation, on 23 medium-size test cases in the PGLib benchmark library with a relaxation gap of more than 1%, we reduce the gap to less than 1% on 5 instances. The tightened model has promising computational results when compared to state-of-the-art formulations.

Description: Conflict-driven Pseudo-Boolean (PB) solvers optimize 0-1 integer linear programs by extending the conflict-driven clause learning (CDCL) paradigm from SAT solving. Though PB solvers have the potential to be exponentially more efficient than CDCL solvers in theory, in practice they can sometimes get hopelessly stuck even when the linear program (LP) relaxation is infeasible over the reals. Inspired by mixed integer programming (MIP), we address this problem by interleaving incremental LP solving with cut generation within the conflict-driven PB search. This hybrid approach, which for the first time combines MIP techniques with full-blown conflict analysis over linear inequalities using the cutting planes method, significantly improves performance on a wide range of benchmarks, approaching a "best of two worlds" scenario between SAT-style conflict-driven search and MIP-style branch-and-cut.

Description: The most important ingredient for solving mixed-integer nonlinear programs (MINLPs) to global epsilon-optimality with spatial branch and bound is a tight, computationally tractable relaxation. Due to both theoretical and practical considerations, relaxations of MINLPs are usually required to be convex. Nonetheless, current optimization solver can often successfully handle a moderate presence of nonconvexities, which opens the door for the use of potentially tighter nonconvex relaxations. In this work, we exploit this fact and make use of a nonconvex relaxation obtained via aggregation of constraints: a surrogate relaxation. These relaxations were actively studied for linear integer programs in the 70s and 80s, but they have been scarcely considered since. We revisit these relaxations in an MINLP setting and show the computational benefits and challenges they can have. Additionally, we study a generalization of such relaxation that allows for multiple aggregations simultaneously and present the first algorithm that is capable of computing the best set of aggregations. We propose a multitude of computational enhancements for improving its practical performance and evaluate the algorithm’s ability to generate strong dual bounds through extensive computational experiments.

Description: The motion of celestial bodies in astronomy is closely related to the orbits of electrons encircling an atomic nucleus. Bohr and Sommerfeld presented a quantization scheme of the classical orbits to analyze the eigenstates of the hydrogen atom. Here we discuss another close connection of classical trajectories and quantum mechanical states: the transient dynamics of objects around a nucleus. In this setup a comet (or an electron) is trapped for a while in the vicinity of parent object (Jupiter or an atomic nucleus), but eventually escapes after many revolutions around the center of attraction.

Description: For providing railway services the company’s railway rolling stock is one if not the most important ingredient. It decides about the number of passenger or cargo trips the company can offer, about the quality a passenger experiences the train ride and it is often related to the image of the company itself. Thus, it is highly desired to have the available rolling stock in the best shape possible. Moreover, in many countries, as Germany where our industrial partner DB Fernverkehr AG (DBF) is located, laws enforce regular vehicle inspections to ensure the safety of the passengers. This leads to rolling stock optimization problems with complex rules for vehicle maintenance. This problem is well studied in the literature for example see Maroti and Kroon 2005, or Cordeau et. al. 2001 for applications including vehicle maintenance. The contribution of this paper is a new algorithmic approach to solve the Rolling Stock Rotation Problem for the ICE high speed train fleet of DBF with included vehicle maintenance. It is based on a relaxation of a mixed integer linear programming model with an iterative cut generation to enforce the feasibility of a solution of the relaxation in the solution space of the original problem. The resulting mixed integer linear programming model is based on a hypergraph approach presented in Borndörfer et. al. 2015. The new approach is tested on real world instances modeling different scenarios for the ICE high speed train network in Germany and compared to the approaches of Reuther 2017 that are in operation at DB Fernverkehr AG. The approach shows a significant reduction of the run time to produce solutions with comparable or even better objective function values.

Description: We investigate the directional locking effects that arise when a monolayer of paramagnetic colloidal particles is driven across a triangular lattice of magnetic bubbles. We use an external rotating magnetic field to generate a two-dimensional traveling wave ratchet forcing the transport of particles along a direction that intersects two crystallographic axes of the lattice. We find that, while single particles show no preferred direction, collective effects induce transversal current and directional locking at high density via a spontaneous symmetry breaking. The colloidal current may be polarized via an additional bias field that makes one transport direction energetically preferred.

Description: The intersection cut paradigm is a powerful framework that facilitates the generation of valid linear inequalities, or cutting planes, for a potentially complex set S. The key ingredients in this construction are a simplicial conic relaxation of S and an S-free set: a convex zone whose interior does not intersect S. Ideally, such S-free set would be maximal inclusion-wise, as it would generate a deeper cutting plane. However, maximality can be a challenging goal in general. In this work, we show how to construct maximal S-free sets when S is defined as a general quadratic inequality. Our maximal S-free sets are such that efficient separation of a vertex in LP-based approaches to quadratically constrained problems is guaranteed. To the best of our knowledge, this work is the first to provide maximal quadratic-free sets.

Description: We consider the problem of verifying linear properties of neural networks. Despite their success in many classification and prediction tasks, neural networks may return unexpected results for certain inputs. This is highly problematic with respect to the application of neural networks for safety-critical tasks, e.g. in autonomous driving. We provide an overview of algorithmic approaches that aim to provide formal guarantees on the behavior of neural networks. Moreover, we present new theoretical results with respect to the approximation of ReLU neural networks. On the other hand, we implement a solver for verification of ReLU neural networks which combines mixed integer programming (MIP) with specialized branching and approximation techniques. To evaluate its performance, we conduct an extensive computational study. For that we use test instances based on the ACAS Xu System and the MNIST handwritten digit data set. Our solver is publicly available and able to solve the verification problem for instances which do not have independent bounds for each input neuron.

Description: Research software has become a central asset in academic research. It optimizes existing and enables new research methods, implements and embeds research knowledge, and constitutes an essential research product in itself. Research software must be sustainable in order to understand, replicate, reproduce, and build upon existing research or conduct new research effectively. In other words, software must be available, discoverable, usable, and adaptable to new needs, both now and in the future. Research software therefore requires an environment that supports sustainability. Hence, a change is needed in the way research software development and maintenance are currently motivated, incentivized, funded, structurally and infrastructurally supported, and legally treated. Failing to do so will threaten the quality and validity of research. In this paper, we identify challenges for research software sustainability in Germany and beyond, in terms of motivation, selection, research software engineering personnel, funding, infrastructure, and legal aspects. Besides researchers, we specifically address political and academic decision-makers to increase awareness of the importance and needs of sustainable research software practices. In particular, we recommend strategies and measures to create an environment for sustainable research software, with the ultimate goal to ensure that software-driven research is valid, reproducible and sustainable, and that software is recognized as a first class citizen in research. This paper is the outcome of two workshops run in Germany in 2019, at deRSE19 - the first International Conference of Research Software Engineers in Germany - and a dedicated DFG-supported follow-up workshop in Berlin.

Description: Friction in liquids arises from conservative forces between molecules and atoms. Although the hydrodynamics at the nanoscale is subject of intense research and despite the enormous interest in the non-Markovian dynamics of single molecules and solutes, the onset of friction from the atomistic scale so far could not be demonstrated. Here, we fill this gap based on frequency-resolved friction data from high-precision simulations of three prototypical liquids, including water. Combining with theory, we show that friction in liquids emerges abruptly at a characteristic frequency, beyond which viscous liquids appear as non-dissipative, elastic solids. Concomitantly, the molecules experience Brownian forces that display persistent correlations. A critical test of the generalised Stokes–Einstein relation, mapping the friction of single molecules to the visco-elastic response of the macroscopic sample, disproves the relation for Newtonian fluids, but substantiates it exemplarily for water and a moderately supercooled liquid. The employed approach is suitable to yield insights into vitrification mechanisms and the intriguing mechanical properties of soft materials.

Description: We investigate polyhedral aspects of the Periodic Event Scheduling Problem (PESP), the mathematical basis for periodic timetabling problems in public transport. Flipping the orientation of arcs, we obtain a new class of valid inequalities, the flip inequalities, comprising both the known cycle and change-cycle inequalities. For a point of the LP relaxation, a violated flip inequality can be found in pseudo-polynomial time, and even in linear time for a spanning tree solution. Our main result is that the integer vertices of the polytope described by the flip inequalities are exactly the vertices of the PESP polytope, i.e., the convex hull of all feasible periodic slacks with corresponding modulo parameters. Moreover, we show that this flip polytope equals the PESP polytope in some special cases. On the computational side, we devise several heuristic approaches concerning the separation of cutting planes from flip inequalities. These produce better dual bounds for the smallest and largest instance of the benchmarking library PESPlib.

Description: The coma of comet 67P/Churyumov-Gerasimenko has been probed by the Rosetta spacecraft and shows a variety of different molecules. The ROSINA COmet Pressure Sensor and the Double Focusing Mass Spectrometer provide in-situ densities for many volatile compounds including the 14 gas species H2O, CO2, CO, H2S, O2, C2H6, CH3OH, H2CO, CH4, NH3, HCN, C2H5OH, OCS, and CS2. We fit the observed densities during the entire comet mission between August 2014 and September 2016 to an inverse coma model. We retrieve surface emissions on a cometary shape with 3996 triangular elements for 50 separated time intervals. For each gas we derive systematic error bounds and report the temporal evolution of the production, peak production, and the time-integrated total production. We discuss the production for the two lobes of the nucleus and for the northern and southern hemispheres. Moreover we provide a comparison of the gas production with the seasonal illumination.

Description: While graph covering is a fundamental and well-studied problem, this field lacks a broad and unified literature review. The holistic overview of graph covering given in this article attempts to close this gap. The focus lies on a characterization and classification of the different problems discussed in the literature. In addition, notable results and common approaches are also included. Whenever appropriate, our review extends to the corresponding partioning problems.

Description: We present the tamper-resistant broadcast abstraction of the Bitcoin blockchain, and show how it can be used to implement tamper-resistant replicated state machines. The tamper-resistant broadcast abstraction provides functionality to: broadcast, deliver, and verify messages. The tamper-resistant property ensures: 1) the probabilistic protection against byzantine behaviour, and 2) the probabilistic verifiability that no tampering has occurred. In this work, we study various tamper-resistant broadcast protocols for: different environmental models (public/permissioned, bounded/unbounded, byzantine fault tolerant (BFT)/non-BFT, native/non-native); as well as different properties, such as ordering guarantees (FIFO-order, causal-order, total-order), and delivery guarantees (validity, agreement, uniform). This way, we can match the protocol to the required environment model and consistency model of the replicated state machine. We implemented the tamper-resistant broadcast abstraction as a proof of concept. The results show that the implemented tamper-resistant broadcast protocols can compete on throughput and latency with other state-of-the-art broadcast technologies. Use cases, such as a tamper-resistant file system, supply chain tracking, and a timestamp server highlight the expressiveness of the abstraction. In conclusion, the tamper-resistant broadcast protocols provide a powerful interface, with clear semantics and tunable settings, enabling the design of tamper-resistant applications.

Description: A new ion mobility (IM) spectrometer, enabling mobility measurements in the pressure range between 5 and 500 mbar and in the reduced field strength range E/N of 5–90 Td, was developed and characterized. Reduced mobility (K0) values were studied under low E/N (constant value) as well as high E/N (deviation from low field K0) for a series of molecular ions in nitrogen. Infrared matrix-assisted laser desorption ionization (IR-MALDI) was used in two configurations: a source working at atmospheric pressure (AP) and, for the first time, an IR-MALDI source working with a liquid (aqueous) matrix at sub-ambient/reduced pressure (RP). The influence of RP on IR-MALDI was examined and new insights into the dispersion process were gained. This enabled the optimization of the IM spectrometer for best analytical performance. While ion desolvation is less efficient at RP, the transport of ions is more efficient, leading to intensity enhancement and an increased number of oligomer ions. When deciding between AP and RP IR-MALDI, a trade-off between intensity and resolving power has to be considered. Here, the low field mobility of peptide ions was first measured and compared with reference values from ESI-IM spectrometry (at AP) as well as collision cross sections obtained from molecular dynamics simulations. The second application was the determination of the reduced mobility of various substituted ammonium ions as a function of E/N in nitrogen. The mobility is constant up to a threshold at high E/N. Beyond this threshold, mobility increases were observed. This behavior can be explained by the loss of hydrated water molecules.

Description: The mixed-integer linear programming (MILP) method has been applied widely to optimal design of energy supply systems. A hierarchical MILP method has been proposed to solve such optimal design problems effi- ciently. As one of the strategies to enhance the computation efficiency furthermore, a method of reducing model by time aggregation has been proposed to search design candidates accurately and efficiently in the relaxed optimal design problem at the upper level. In this paper, the hierarchical MILP method and model reduction by time aggregation are applied to the multiobjective optimal design. In applying the model reduc- tion, the methods of clustering periods by the order of time series, based on an operational strategy, and by the k-medoids method are applied. As a case study, the multiobjective optimal design of a gas turbine cogeneration system with a practical configuration is investigated by adopting the annual total cost and pri- mary energy consumption as the objective functions to be minimized simultaneously, and the clustering methods are compared with one another in terms of the computation efficiency. It turns out that the model reduction by any clustering method is effective to enhance the computation efficiency when importance is given to minimizing the first objective function. It also turns out that the model reduction only by the k- medoids method is effective very limitedly when importance is given to minimizing the second objective function.

Description: This study examines the usability of a real-world, large-scale natural gas transport infrastructure for hydrogen transport. We investigate whether a converted network can transport the amounts of hydrogen necessary to satisfy current energy demands. After introducing an optimization model for the robust transient control of hydrogen networks, we conduct computational experiments based on real-world demand scenarios. Using a representative network, we demonstrate that replacing each turbo compressor unit by four parallel hydrogen compressors, each of them comprising multiple serial compression stages, and imposing stricter rules regarding the balancing of in- and outflow suffices to realize transport in a majority of scenarios. However, due to the reduced linepack there is an increased need for technical and non-technical measures leading to a more dynamic network control. Furthermore, the amount of energy needed for compression increases by 364% on average.

Description: The identification of sound sources is a common problem in acoustics. Different parameters are sought, among these are signal and position of the sources. We present an adjoint-based approach for sound source identification, which employs computational aeroacoustic techniques. Two different applications are presented as a proof-of-concept: optimization of a sound reinforcement setup and the localization of (moving) sound sources.