Library

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • 1995-1999  (3,566)
  • 1975-1979  (1,461)
  • Engineering  (3,907)
  • Life Sciences  (1,119)
  • Nuclear reactions
  • 1
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 357-363 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: An alternative microbiological method for the production of malate from fumarate is presented. The yeast Dipodascus magnusii was used for this bioconversion.The optimum cell growth temperature was 28°C and the working volume 120 ml. The highest level of fumarase activity during bioconversion was achieved at a pH of 7.5 and a temperature of 37°C. These conditions were determined as optimal. Using sodium fumarate (1M), the maximum specific productivity of malic acid obtained was 1.72 g/(gDCW × h) for intact cells. In the case of ammonium fumarate, it was 2.25 g/(gDCW × h).
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 2
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 27-36 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: Ethanol has been reported to be a gaseous pollutant, originating from the agricultural industry. Interest in its biodegradation has increased over the last two decades. Most of the current studies have focused on its elimination by mixed cultures. This study is part of a broader project intended to utilize Candida utilis strains for gaseous ethanol elimination and to eventually bioconvert them into biomass and/or volatile metabolites. We present here the study of six strains (one from the ATCC and five from the ICIDCA collection) cultivated in a liquid medium, with initial ethanol concentrations of 16 g/l and 32 g/l. At 16 g/l, a maximum ethanol elimination rate of 0.13 g/l × h was obtained in four of the six strains (ATCC 9950, L/375-1, L/375-5 and L/375-10). This rate increased to 0.21 g/l × h with an initial ethanol concentration of 32 g/l. The L/375-5 strain was the best biomass producer (3.3 g/l) at 32 g/l, while the highest ethyl acetate production (0.80 g/l) was obtained with the L/375-1 strain. The L/375-25 and L/375-26 strains which showed very low ethyl acetate production were, by way of contrast, efficient acetaldehyde producers, with 0.54 g/l and 0.66 g/l measured in the broth. While biomass production reached its maximum after two days of culture, the production of acetic acid and ethyl acetate continued during the third day. The results for biomass and metabolite production obtained with the ICIDCA collection strains (L/375-1, L/375-5 and L/375-10) were better than those obtained with the ATCC 9950 strain, although the latter often has been reported to be particularly suitable for metabolite production.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 3
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 45-56 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The culture behaviour of Thermus aquaticus was characterized. The response of the bacterium to various carbon (tryptone, glucose, glycerol) and nitrogen sources (yeast extract, NaNO3, (NH4)2SO4, leucine, thymine, thiamine, glutamic acid) was studied. Amino acids did not support growth, but CASTENHOLZ salt medium supplemented with yeast extract and glucose or tryptone resulted in good growth and production. A suitable medium composition giving the highest biomass concentration and enzyme yield was developed. The simple medium containing TYE-NaCl resulted in the highest biomass concentration, whereas CASTENHOLZ mineral medium supplemented with tryptone and yeast extract gave the highest specific activity and enzyme yield. The effect of inoculum age and size on growth was also investigated in order to improve the yield and process consistency. The use of shake flasks inoculated with precultures at their early or late stationary phase resulted in the same biomass concentration (0.56 ± 0.015 g/l) and similar maximum specific growth rates (0.258 ± 0.003 h-1). Inoculum sizes between 1 and 2.5 per cent were optimal for cell growth. As the other papers on thermophilic microorganisms, including the T. aquaticus YT-1 strain, gave qualitative information on growth, the results presented here cannot be compared with others on a quantitative basis. TaqI endonuclease was purified using a 5 step protocol including cell disruption, adsorption, precipitation, column chromatography and final dialysis. The enriched fraction had a specific activity of 33,600 U TaqI endonuclease per mg protein.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 4
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999) 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 5
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 6
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The effects of adding some inducers of lignolytic activity to semi-solid-state cultures of Phanerochaete chrysosporium BKM-F-1767 (ATCC 24725) were investigated. The inducers assayed were veratryl alcohol and solid manganese (IV) oxide. The microorganism was cultured on corncob, which functioned both as physical support and source of nutrients.Supplementing the cultures with veratryl alcohol created the situation where manganese-dependent peroxidase (MnP) and lignin peroxidase (LiP) activities of approximately 1,500 U/l and 200 U/l, respectively, could be attained. These activities were considerably higher than those obtained in the reference cultures (about 5 and 4-fold).In the same way, the addition of manganese (IV) oxide led to MnP and LiP activity levels of about 2,000 U/l and 300 U/l, respectively. These activities were also notably above (about 6 and 5-fold, respectively) those achieved in the reference cultures.Moreover, laccase activity (around 200 U/l) was only detected in veratryl alcohol or manganese (IV) oxide supplemented cultures.
    Additional Material: 1 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 7
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 37-44 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: Agar-agar, agarose, carrageenan and calcium alginate were used for the immobilization of Dunaliella salina cells. Out of the four, agar-agar was found to be the most effective and therefore the study was carried out on it using different pH values ranging from 6 to 10 and cell densities from 0.1 to 0.8 μg chlorophyll (chl, a) per bead to find which are is best suited for glycerol production. The maximum glycerol production of 9.2 μM/mg chl a was recorded in agar-agar immobilized algae and this was followed by 8.4 μM/mg chl a in calcium alginate. The maximum cell number 6.2 × 109/ml and the specific growth rate (μ) of 0.80 l/day were reached at pH 8 in agar-agar immobilized algae. It was shown that the maximum amount of glycerol was produced when the cell density was 0.8 μg chl a/ block. Changing the medium after 24 hours affected the rate of glycerol production at different pH values. Using a cell density of 0.8 μg chl a/block at 16 W/m2 light intensity increased the glycerol production in comparison with the use of free living cells.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 8
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 9
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 69-75 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: An increase in the molar growth yield (YX/S = 14.3-20.3 g/mol) on glucose (25 mM) was achieved after the transition of Zymomonas mobilis ATCC 29191 from anaerobic to aerobic steady state growth at dilution rates of D = 0.31-0.40 1/h and under oxygen-unlimited conditions. The transfer of anaerobically or aerobically grown steady state cells into a fresh medium resulted in the higher values of YX/S. A positive correlation was established between biomass and acetaldehyde yield within the range of 5-9 mM acetaldehyde in the medium. An inhibitory effect of the exogenously added acetaldehyde (Ki = 16.7 ± 2.8 mM) on the ATPase activity was observed in vitro, using cell-free extracts of anaerobically grown Z. mobilis. The results obtained provide evidence that the increased values of biomass yield could be explained by the redirection of ATP usage during aerobic growth of Z. mobilis.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 10
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 77-78 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 11
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999) 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 12
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 79-86 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: Methylobacterium rhodesianum MB 126, a pink-pigmented facultatively methylotrophic bacterium that uses that serine pathway for the assimilation of reduced C1 compounds, is able to produce poly-3-hydroxybutyrate (PHB) under certain limitation conditions. Mutants of this bacterium, which were isolated after the treatment with sodium nitrite, are impaired in their ability to synthesize PHB, but produce another polymer in addition to PHB, namely an exopolysaccharide (EPS). This paper attempts to explain this surprising behaviour.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 13
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 91-100 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The stability of a polyphenol oxidase (PPO) preparation from the white-rot fungus Trametes versicolor during a process for the enzymatic decrease of the phenolic content of commercial canola meal (CM) was investigated. The effects of temperature, pH, protein origin and concentration, and meal particles were considered. The results showed that the thermal stability of the enzyme preparation was significantly increased in the presence of CM. The half-life times for the enzyme preparation, pre-incubated with CM at 50, 60, 70 and 75°C, were 45, 10.5, 3.5 and 1.5 hours, respectively; this represents an increase in the thermal stability of the enzyme preparation of up to four times in the presence of CM compared to the stability in the absence of CM. This effect was caused by the protective actions of both the CM particles and CM proteins, with the former responsible for 90% of the observed effect. The thermal stability of the enzyme in the presence of CM, from which 20% of the extractable proteins was extracted, was 5% lower compared to the stability in the presence of untreated CM. Changes in pH level from 5.0 to 3.2 resulted in a loss of stability comparable to that observed when the pre-incubation temperature was increased from 50 to 70°C.A semi-empirical model describing the changes in the concentration of the active enzyme pre-incubated in the presence and absence of CM at various incubation temperatures was proposed. A very good agreement between the model and experimental data was obtained. The proposed model, together with a general set of model parameters, can be used as a tool for the optimization of a process for the upgrade of CM by enzymatically decreasing the meal's phenolic content.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 14
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 111-145 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: A non-comprehensive review of several technical developments in the field of aerobic biological waste-water treatment engineering is carried out, considering the active role the engineers have to play in this field. This paper brings together conventional and advanced problems in the field of aerobic biological waste-water treatment.Such an overview of biological waste-water treatment also precedes comments on some important aspects concerning the microorganisms responsible for waste-water treatment as well as considerations of the application of fundamentals and kinetics to the analysis of the biological processes used most commonly for aerobic biological waste-water treatment.A survey of the development of the biological activated-sludge process and some modifications are given. Some problems implied in the conventional activated-sludge waste-water treatment are analyzed, considering conventional processes and bioreactor models (the continuous stirred-tank reactor model and the plug-flow reactor models of the activated-sludge process) as well as aerated lagoons.Further, modifications of the activated-sludge process are presented. These include additional details on the bioreactor progress and applications, with emphasis on aspects concerning airlift bioreactors and their variants, deep-shaft bioreactors and reciprocating jet bioreactors which are considered as the third generation of bioreactors owing to their important advantages in design, operation and performance in waste-water treatment. Sequencing-batch reactors and aerobic digestion processes, including conventional aerobic digestion, high-purity oxygen digestion, thermophilic aerobic digestion and cryophylic aerobic digestion are also reviewed.Finally, some aspects regarding the operational factors that are involved in the selection of the reactor type are included.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 15
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 16
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: In the first part of the experiments, the mechanical properties of 1%, 2% and 3% carrageenan and 1%, 2% and 3% carrageenan/locust bean gum (LBG) gels stored in various concentrations of propionic and acetic acids and their mixtures were examined. The stability of these materials was measured by uniaxial compression between two parallel plates using the Instron Universal Testing Machine. A mathematical model explaining the dependence of the destroying force on the storage time was chosen for data analysis. Using this model, the average rate of gel deterioration was calculated. The structural properties of the examined gels were most influenced by the highest concentration of propionic and acetic acids and their mixtures (1% acetic acid and 2% propionic acid). The addition of LBG to carrageenan decreased the gel destroying force and increased its resistance to acids.In the second part of the experiments, the Propionibacterium freudenreichii subsp. shermanii NCFB 1081 and NCFB 566 were immobilized in a living state in 1%, 2% and 3% carrageenan and 1%, 2% and 3% carrageenan/LBG gels. The ammonia consumption, glucose utilization, production of propionic and acetic acids and the biosynthesis of vitamin B12 were examined. An increase in the productivity of propionic acid and a significant decrease in the vitamin B12 produced in the biosynthesis were observed when immobilized cells were used. The immobilization of cells enhanced the productivity of propionic acid by up to 40% compared to free cells. The best results were obtained for the second and third applications of immobilized cells in all concentrations of carrageenan gels and 2% and 3% carrageenan/LBG gels The results showed that carrageenan/LBG is a better support material for the immobilization of propionic acid bacteria than the pure carrageenan.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 17
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 18
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 19
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 179-186 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: Spores of Aspergillus niger were exposed to a pulsed electric field. After treatment by the electric field, the viability of the conidia of A. niger varied depending on the field strength, pulse width and frequency. In all cases, these parameters reduced the viability rate of the conidia from 2.0 × 107 to a range from 6.2 × 106 to 8.5 × 106 spores/ml (3.1 to 42.6%). After pulse treatment, the conidia were used as the inoculum for citric acid fermentation in shake flasks. The highest increase in citric acid yield (about 1.4-fold) was reached at a field strength of 2.85 kV/cm, a frequency of 1 Hz and a pulse width of 1 ms. When the parameters of the electric field increased there were important changes in the respiration rate of the Aspergillus niger mycelium (48-h-old) after electric shock treatment. The highest consumption of dissolved oxygen (22.9%) in the medium by Aspergillus niger mycelium was observed at an electric field strength of 2.85 kV/cm, a 1 Hz frequency, a pulse width of 1 ms and a 1-min exposure period. It seems that an electric-field stimulation of the conidia prior to inoculation may offer an important method of improving the efficiency of citric acid. The treatment of the conidia is both simple from the technical point of view and extremely rapid.
    Additional Material: 3 Tab.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 20
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 205-210 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The application of biotechnology in environmental processes is an enormous subject that could remain the topic of a university lecture course for many years. For this reason I wish to limit my lecture to a few examples and to attempt to sketch out particularly promising opportunities for future development.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 21
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 22
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 23
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 213-223 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The Acinetobacter sp. E11, isolated from Port Dickson Beach, Malaysia, was able to grow in media containing crude oil as the sole carbon and energy source. Substrate specificity studies showed that the bacterium exhibited substrate preference as growth was observed only in media containing aliphatic hydrocarbons, while aromatic and cyclic hydrocarbons inhibited growth. With the aliphatic hydrocarbons, growth was seen only in the long-chain alkanes tested (pentadecane, dodecane and hexadecane). No growth was recorded in the short-chain alkanes (pentane, hexane and heptane) tested. With complex hydrocarbons, only crude oil and 4T SHELL engine oil supported growth. No growth was observed in kerosene and PETRONAS gasoline. The isolate could grow in up to 10% and 20% [v/v] of the crude oil and alkanes tested, respectively. Among the long-chain alkanes tested, hexadecane was the most preferred, followed by pentadecane and dodecane. Nitrogen and phosphorous supplements were essential for growth and the best growth was achieved with 3% nitrogen/phosphorous additions. Microscopic observation revealed that the bacterium adhered to the hexadecane and crude oil droplets. GC analysis showed that the bacterium was able to degrade more than 60% of the hydrocarbons in the crude oil in 15 days at 37°C compared to the uninoculated media.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 24
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 25
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The biosynthesis of bacterial cellulose by Acetobacter xylinum was optimized by numerically finding the maximum of an arbitrarily chosen second order polynomial model function of several variables (describing the dependence of the cellulose production on the concentrations of the medium components), using multivariable linear regression analysis. The chosen function appeared to describe the analyzed correlation sufficiently well. Consequently, three to six stages of optimization made the determination of the optimum medium compositions possible for 16 days of fermentation at 30°C in a medium based on fructose (wt%: fructose, 3.68; yeast extract, 5.02; (NH4)2NO3, 0.001; KH2PO4, 0.3; MgSO4 × 7 H2O, 0.05; resulting in a cellulose production equal to 0.505 wt.% - namely 5.6 times higher than before the optimization) and for 7 days fermentations at 30°C in a medium based on sucrose and ethanol (wt.%: sucrose, 5.0; ethanol, 1.36; yeast extract, 1.27; (NH4)2SO4, 0.5; KH2PO4, 0.3; MgSO4 × 7 H2O, 0.05; resulting in a cellulose production equal to 0.251 wt.% - namely 1.5 times higher than before the optimization).
    Additional Material: 1 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 26
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 27
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999) 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 28
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 293-304 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The mineralization of a non-ionic alcohol ethoxylate (AEO) surfactant was investigated over the concentration range occurring in rinsing water from surfactant production processes. For this, an experimental set-up for respirometric batch experiments was developed. The set-up and the method were validated by experiments with glucose as the single carbon source. It was possible to calculate substrate decay from the time course of exogenously consumed oxygen during respirometric batch experiments. The kinetic coefficients calculated by respirometry showed a lower standard deviation than those calculated from emasured glucose concentrations.The degradation mechanism of AEO was investigated by identification of metabolities, occurring during the mineralization process of AEO, using Flow Injection Mass spectrometry (FI-MS). It was concluded that the degradation of AEO occurs in two main steps. First, the enzymatic hydrolysis of AEO into alcohol and polythylene glycol (PEG) is performed. Second, the mineralization of both substances takes place, while the mineralization of the alcohol is faster than that of the PEG. The mineralization kinetics were investigated in respirometric batch experiments. The model used is based on double MONOD kinetics for the substrates being produced by hydrolysis (μmax1 = 0.047 h-1, Ks1 = 15 mg/l DOC for alcohol; μmax2 = 0.027 h-1, KS2 = 4 mg/l DOC for PEG). The validation of the model by calculating the results obtained from measurements in a continuously operated lab scale CSTR with bacteria recycle was successful.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 29
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 279-292 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The continuous aerobic degradation of phenoxyalkanoate herbicides by Sphingomonas herbicidovorans MH was investigated in a bubble reactor filled with modified polyurethane-foam (PU 90/51) as a carrier for the adsorptive immobilization of the bacterial cells. The PU-foam was applied in the form of plates (5 × 10 × 10 mm) and the amount added was equivalent to a PU-load of 1.25% [w/v]. Strain MH is capable of detoxifying the dichloro-substituted phenoxyalkanoates 2,4-DP, 2,4-D and 2,4-DB and the methylchloro-substituted phenoxyalkanoates MCPA, MCPP and MCPB. Degradation of the respective substrate was followed by HPLC analyses and by determination of the chloride release. No intermediates of the degradation pathways or “dead end” products were detected by HPLC analyses. The PU-bubble reactor with immobilized 2,4-DP-pre-grown cells was run continuously at 30°C at the high dilution rate of D = 0.5h-1 with 2,4-DP (0.2 g/l), and with subsequent changes to each of the other phenoxyalkanoates as a single substrate in the feed and with an intermittent return to 2,4-DP. Finally, after an intermediate substrate accumulation, 2,4-D, 2,4-DP, MCPA and MCPP could be degraded under the aforementioned conditions corresponding to a maximum degradation rate of Qphen = 100 mg/l × h. In the case of 2,4-DB, a slightly reduced conversion rate of about 94% could be calculated. In contrast to these results, 0.2 g/l of the more recalcitrant MCPB could not be metabolized at this high dilution rate of D = 0.5 h-1 by the biofilm of Sphingomonas herbicidovorans MH, but it was degradable at a reduced dilution rate of D = 0.25 h-1. Complete detoxification of a stoichiometric mixture of the dichloro- and the methylchloro-substituted phenoxyalkanoates including MCPB, respectively, at a total concentration of 0.2 g/l was achieved at D = 0.25 h-1, corresponding to a degradation rate of Qtot = 50 mg/l × h. Finally, the efficiency of the PU-immobilized cells of Sphingomonas herbicidovorans MH in detoxifying mixtures of all six herbicides could be increased to Qtot = 75 mg/l × h by the further addition of PU-foam particles corresponding to a final PU-load of 2.5% [w/v]. This PU-bubble reactor was successfully operated for more than 12 months to clean up synthetically concocted waste waters with fluctuations in phenoxyalkanoate concentration and composition.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 30
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 31
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: Selected strains of basidiomycetes (Abortiporus biennis, Trametes versicolor and Cerrena unicolor) were shown to produce enhanced extracellular peroxidase (EP), superoxide dismutase (SOD) and laccase activities following the exposure of 10-day-old fungal cultures to separate high and low temperature stress. The stressful conditions also caused an increase in the concentrations of phenol compounds and superoxide anion radicals in these cultures. At first, peroxidase activity was observed at 12 hours from the moment of temperature stress application. Laccase activity appeared at 96 hours after the maximum levels of superoxide anion radicals (48 h) and SOD activity (36-72 h). The concentration of phenolic substances grew steadily during the period of cultivation. These relations between laccase, SOD and EP as well as superoxide radicals and phenol levels in the environment of ligninolytic fungi seems to be important in the course of the biosynthesis or biodegradation of lignin, as the consequence of adaptation of these basidiomycetes to environmental temperature conditions.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 32
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 356-356 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 33
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: In the present work, the use of flame-burned WS as carriers of Z. mobilis and extracellular levansucrase and the effect of the cell fixation method by dehydration on system productivity were investigated. Lyophilization and convective drying of Z. mobilis biomass at 30°C to a moisture content of 10-14% gave the best results for the repeated batch fermentations of a sucrose medium to obtain levan and ethanol. Significant correlation between the product formation and the concentration of free cells in the fermentation medium was established. Clearly, the cells were weakly bound to the newly generated WS and were washed out into the medium during fermentation. Here the hypothesis is presented that components excreted from damaged cells during dehydration can intensify the reactivation of damaged living cells and influence the interactions between the cells and the wire surface.The passive immobilization of extracellular levansucrase in oxidized WS was also observed. The superiority of oxidized WS in comparison with non-treated WS is related to an increase in the number of OH groups. The potential regeneration of WS by burning after the termination of fermentation cycles was also considered.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 34
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 35
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 163-169 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The morphogenetic response of Hypericum perforatum seedlings to different auxin and cytokinin concentrations was studied. A stimulation of the concentration-dependent rooting ability was observed under the influence of indole-3-acetic acid and indole-3-butyric acid. Rooting was not enhanced by the effects of 2,4-dichlorophenoxyacetic acid and 1-naphtaleneacetic acid. Differentiated roots were isolated and cultured in liquid media with the same combination of growth-promoting auxins. Chromosome counts in root tip cells after long-term cultivation indicated a high degree of chromosomal instability. Multiple shoot formation occurred under the influence of 6-benzylaminopurine and kinetin. Adenine and 6-(γ,γ-dimethylallylamino)-purine did not stimulate shoot differentiation. No differences in the morphogenetic response to auxins and cytokinis were detected between diploid and tetrapoloid plants.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 36
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 37
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 38
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 225-233 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The potential of using indigenous microorganisms in beach sediments to degrade petroleum hydrocarbons emanating from marine oil spillages in the Straits of Singapore was investigated. A field trial was conducted using oil contaminated beach sediments from Pulau Semakau - a small island 15 km south of Singapore. The results clearly show that the addition of inorganic nutrients to beach sediments significantly enhanced the activity of indigenous microorganisms (measured using the dehydrogenase enzyme assay and viable cell count techniques), as well as the removal of total recoverable petroleum hydrocarbons (TRPH) over a 50-day study period (with up to 44% in the case of nutrient addition). The potential of exploiting in-situ bioremediation techniques for oil spill clean-up operations in tropical marine environments is discussed.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 39
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 235-250 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: A new low-cost β-galactosidase (lactase) preparation for whey permeate saccharification was developed and characterized. A biocatalyst with a lactase activity of 10 U/mg, a low transgalactosylase activity and a protein content of 0.22 mg protein/mg was obtained from a fermenter culture of the fungus Penicillium notatum. Factors influencing the enzymatic hydrolysis of lactose, such as reaction time, pH, temperature and enzyme and substrate concentration were standardized to maximize sugar yield from whey permeate. Thus, a 98.1% conversion of 5% lactose in whey permeate to sweet (glucose-galactose) syrup was reached in 48 h using 650 β-galactosidase units/g hydrolyzed substrate. After the immobilization of the acid β-galactosidase from Penicillium notatum on silanized porous glass modified by glutaraldehyde binding, more than 90% of the activity was retained. The marked shifts in the pH value (from 4.0 to 5.0) and optimum temperatures (from 50°C to 60°C) of the solid-phase enzyme were observed and discussed. The immobilized preparation showed high catalytic activity and stability at wider pH and temperature ranges than those of the free enzyme, and under the best operating conditions (lactose, 5%; β-galactosidase, 610-650 U/g lactose; pH 5.0; temperature 55°C), a high efficiency of lactose saccharification (84-88%) in whey permeate was achieved when lactolysis was performed both in a batch process and in a recycling packed-bed bioreactor. It seems that the promising results obtained during the assays performed on a laboratory scale make this immobilizate a new and very viable preparation of β-galactosidase for application in the processing of whey and whey permeates.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 40
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 263-272 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: An acid α-amylase hyperproducing strain, designated as MIR-61, was isolated in a screening procedure from South American soil samples. MIR-61, a 60°C thermoresistant strain, was identified using 98 biochemical and morphological tests and characterized as Bacillus licheniformis by numerical taxonomy. Batch cultures of B. licheniformis MIR-61 showed extracellular α-amylase and α-glucosidase activities during the exponential growth phase.The production of α-amylase was studied at free and constant pH values at 37 and 45°C. Maximum α-amylase activity (4,767 kU/dm3 in a liquid medium) was detected at 45°C at a constant pH (7.0) in the late exponential phase. The α-amylase production by B. licheniformis MIR-61 is 10 to 300 times higher than the enzyme production reported in strains of the same species.Optimum α-amylase activity was found at 50 to 67°C in an acid pH range from 5.5 to 6.0. These properties would allow its use in starch industry processes.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 41
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 42
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 43
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 349-355 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: Comamonas acidovorans MC1, which is capable of degrading the chiral phenoxypropionate herbicides 2-(2,4-dichlorophenoxy)propionate [dichlorprop, (RS)-2,4-DP] and 2-(4-chloro-2-methylphenoxy)propionate [mecoprop, (RS)-MCPP] and of degrading the phenoxyacetate herbicides 2,4-dichlorophenoxyacetate (2,4-D) and 4-chloro-2-methylphenoxyacetate (MCPA), was investigated with respect to the enzymatic basis of this broad substrate specificity. The initial steps of the degradation pathway of (RS)-2,4-DP and 2,4-D were studied. By applying either ion exchange chromatography or hydrophobic interaction chromatography it was possible to separate two enzyme fractions with etherolytic activity, which exhibited pronounced substrate specificity. One enzyme fraction was highly specific for the degradation of the R-enantiomer of 2,4-DP and did not essentially attack the S-configuration. The other enzyme fraction showed pronounced activity toward the cleavage of the S-enantiomer and additionally utilized 2,4-D with almost equal velocity; (R)-2,4-DP was even cleaved at a low rate by this enzyme. These results confirm the existence of phenoxyalkanoatedegrading enzymes with enantiospecific properties in strain MC1.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 44
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 3-16 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The kinetics of cellobiose hydrolysis was studied using β-glucosidase from Penicillium funiculosum, both free and immobilized on nylon powder, at different temperatures, pH values, enzymatic activities and initial cellobiose and glucose concentrations.The experimental results were fitted to a kinetic model by considering the substrate and product inhibitions as well as the thermal deactivation of β-glucosidase with a mean deviation of less than 10%. The immobilization of β-glucosidase led to an increase in the stability of the enzyme against changes in the pH value.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 45
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 46
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 59-68 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The ability of the Rhizobium sp., isolated from the root nodules of the leguminous pulse yielding shrub Cajanus cajan, to produce extracellular polysaccharides (EPS) was checked. A large amount of EPS (1, 128 μg/ml) was produced by the bacteria in yeast extract mannitol medium. Growth and EPS production started simultaneously, but the production reached its maximum level in the stationary phase of growth at 28 h. The EPS production by this Rhizobium sp. was much higher than by many other strains from nodules of Cajanus cajan which took a much longer time to reach maximum EPS production than this strain. The maximum EPS production (2,561 μg/ml) was obtained when the medium was supplemented with mannitol (1%), cetyl pyridinium chloride (2 μg/ml) and KNO3 (0.2%), in which the production was increased by 276% compared to the control. The EPS production rose in the period up to 65 h with increased mannitol concentration. The EPS contained arabinose, xylose and rhamnose monomers. The possible role of rhizobial EPS production in root nodule symbiosis is discussed.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 47
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 48
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 88-88 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 49
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 171-177 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The bioaccumulation of cadmium by the white rot fungus Pleurotus sajor-caju onto dry biomass was investigated using aqueous media with concentrations in the range of 0.125 mM-1.0 mM The highest cadmium uptake (between 88.9 and 91.8%) was observed with aerobic fungal biomass from the exponential growth phase. Up to 1.0 mM cadmium gradually inhibited mycelium development, but never blocked it completely. Freeze-dried, oven-dried and non-metabolizing live Pleurotus sajor-caju biomass types were tested for their capacity to adsorb the test ion Cd2+ within the pH range of 4.5 to 6.0. Freeze-dried biomass proved to be the most efficient biomass type for Cd2+ metal adsorption. Therefore, Pleurotus sajor-caju may be used for heavy metal removal and bioremediation.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 50
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 51
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 307-318 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The biodesulphurization of Mengen lignite by a mesophilic bacterium, Rhodococcus rhodochrus ATCC 53968, was investigated in a batch stirred and aerated reactor. The experiments were carried out at 28°C with an inoculum percentage, initial pH, initial sodium acetate and lignite concentration of the biodesulphurization medium of 8% [v/v], 6.5 mM, 20 mM and 20 g/l, respectively. Variations in the sulphur contents of the lignite relative to the biodesulphurization period were monitored. The effects of the stirring and aeration rates on the removal of different sulphur forms from coal were investigated in the ranges 450-1,200 rpm and 0.1-0.53 vvm and the optimum values were found to be 500 rpm and 0.18 vvm, respectively. An increase in the total sulphur reduction with increasing biodesulphurization time was observed. The maximum total sulphur removal percentage was found to be 15.2% at 1,200 rpm after four days of incubation. The highest total sulphur removal rate was calculated on the second day of microbial desulphurization for each run. The total and organic sulphur contents of the coal after biodesulphurization were correlated with the stirring and aeration rates by using the non-linear least squares regression method. In the experimental runs lasting 8 days, the highest organic sulphur reducing percentage of 10.1% was obtained at a stirring rate of 500 rpm and an aeration rate of 0.40 vvm.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 52
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 331-339 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The Rhizobium sp., isolated from the root nodules of the leguminous fodder herb Melilotus alba, produced large amounts of extracellular polysaccharides (EPS) (963.5 μg/ml) in a yeast extract mannitol medium. Growth and EPS production started simultaneously, but EPS production reached its maximum during the stationary phase of growth of the bacteria, at 20 hours. EPS production was increased with all of the thirteen sugars tested. Different nitrogen sources, such as nitrates, glutamic acid, casamino acid and L-asparagine, increased the EPS production although it was inhibited by glycine, nitrite and ammonium salts. Among the vitamins and metal ions, only pyridoxal phosphate and ZnSO4 promoted EPS production. Attempts were made to optimize the cultural requirements for growth and maximum EPS production. Maximum EPS production (1457.0 μg/ml) was obtained when the medium was supplemented with glucose (1%), pyridoxal phosphate (2 μ g/ml), ZnSO4 × 7 H2O (10 μg/ml) and glutamic acid (0.1%). Under these conditions, the production was increased by 254.3% compared to the control. The EPS contained arabinose, xylose and rhamnose monomers. The presence of arabinose and xylose in the EPS produced by a Rhizobium sp. was uncommon.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 53
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 86-87 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 54
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 55
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 101-109 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: Pleurotus sajor-caju (FR.) SINGER was cultivated on different organic wastes, namely sericulture waste, Populus deltoides MARSH, and Eupatorium adenophorum SPRENG. Paddy straw was taken as the control and all the data were compared with it. The mineral contents of the fruiting bodies of Pleurotus sajor-caju and the substrates on which the mushroom was grown were analyzed. Among the eight minerals determined (calcium, phosphorus, potassium, magnesium, sodium, iron, manganese and zinc), the potassium content was highest followed by phosphorus, magnesium and sodium. Analysis of the mineral contents of the substrates before cultivation had also been carried out. The mineral contents of the fruiting bodies of Pleurotus sajor-caju were found to be different on different substrates. It was also observed that the mineral contents of the fruiting bodies of Pleurotus sajor-caju increase when cultivated on substrates with higher mineral contents. The maximum mineral contents per 100 g of the substrates before cultivation were Ca - 347 mg; P - 151 mg; K - 1,805 mg; Na - 127 mg; Mg - 227 mg; Fe - 53 mg; Mn - 10 mg and zn - 3.1 mg. The mineral contents of the fruiting bodies of Pleurotus sajor-caju per 100 g ranged as follows: Ca - 25.1 mg to 35.3 mg; P - 448 mg to 602 mg; K - 2,146 mg to 2350 mg; Na - 139 mg to 229 mg; Mg - 153 mg to 224 mg; Fe - 9.74 mg to 20.75 mg; Mn - 2.5 mg to 4.0 mg and Zn - 2.2 mg to 3.1 mg.
    Additional Material: 3 Tab.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 56
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 146-146 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 57
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 157-161 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: A xylanase was removed from crude extract of the fungus Penicillium janthinellum under optimized conditions: 0.10M phosphate buffer, pH 7.0, 0.2 M BDBAC (N-benzyl-N-dodeceyl-N-bis (2-hydroxyethyl) ammonium chloride), 7.5% hexanole, 30°C and an agitation time of 1 minute. At 1.42 mg per ml protein concentration, 73% of the xylanase activity was recovered and a 7-fold enrichment factor was obtained. The enzyme had a molecular weight (MW) of 20.1 kDa and the isoelectric point (PI) revealed the presence of two protein bands with a PI of 6.0 and 6.5. The optimum pH and optimum temperature were 4.2 and 50°C, respectively. The low pH differential between the aqueous medium and the protein PI seemed to influence the xylanase transportation into the reversed micelles.
    Additional Material: 2 Tab.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 58
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999) 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 59
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 60
    Electronic Resource
    Electronic Resource
    Berlin : Wiley-Blackwell
    Acta Biotechnologica 19 (1999), S. 191-203 
    ISSN: 0138-4988
    Keywords: Life Sciences ; Life Sciences (general)
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The population of poly-β-hydroxybutyrate-degrading microorganisms and the biodegradation of PHB in local landfill soils were examined in vitro and in vivo. Forty-two PHB-degraders consisting of 12 bacteria, 25 actinomycetes and 5 moulds were isolated. The total PHB-degraders averaged 4.7 × 107 and 20 × 104 colony forming units (cfu)/g for San Mateo wet and dry soils, respectively, and 2.3 × 107 and 8.5 × 104 cfu/g for Carmona wet and dry samples, respectively. The PHB-degraders formed 0-59% of the total microbial population in San Mateo and 8-42% in Carmona. Complete (100%) degradation of PHB powder was observed for Chryseomonas-27 and Aspergillus-39 on day 5 in shake flask culture and for Streptomyces-4 on day 7. Burial test in landfill soils showed a 90-91% weight loss of PHB film strips within four weeks; the weight loss of polypropylene film strips was up to 0.12% only. Scanning electron micrographs of degraded films revealed the attachment of microbial cells and fungal mycelium and spores on the surfaces. Holes and cavities were also noted due to the microbial degradation processes.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 61
    Electronic Resource
    Electronic Resource
    Springer
    Space science reviews 84 (1998), S. 199-206 
    ISSN: 1572-9672
    Keywords: Nuclear reactions ; Nucleosynthesis ; Abundances ; Stars:Evolution ; Interior ; Rotation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Physics
    Notes: Abstract We first recall the observational and theoretical facts that constitute the so-called 3He problem. We then review the chemical anomalies that could be related to the destruction of 3He in red giants stars. We show how a simple consistent mechanism can lead to the destruction of 3He in low mass stars and simultaneously account for the low 12C/13C ratios and low lithium abundances observed in giant stars of different populations. This process should both naturally account for the recent measurements of 3He/H in galactic HII regions and allow for high values of 3He observed in some planetary nebulae. We propose a simple statistical estimation of the fraction of stars that may be affected by this process.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 62
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 57-78 
    ISSN: 0271-2091
    Keywords: parallel processing ; domain partitioning ; hybrid grids ; grid adaptation ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: A parallel finite volume method for the Navier-Stokes equations with adaptive hybrid prismatic/tetrahedral grids is presented and evaluated in terms of parallel performance. A new method of domain partitioning for complex 3D hybrid meshes is also presented. It is based on orthogonal bisection of a special octree corresponding to the hybrid mesh. The octree is generated automatically and can handle any type of 3D geometry and domain connectivity. One important property of the octree-based partitioning that is exploited is the octree's ability to yield load-balanced partitions that follow the shape of the geometry. This biasing of the octree results in a reduced number of grid elements on the interpartition boundaries and thus fewer data to communicate among processors. Furthermore, the octree-based partitioning gives similar quality of partitions for very different geometries, while requiring minimal user interaction and little computational time. The partitioning method is evaluated in terms of quality of the subdomains as well as execution time. Viscous flow simulations for different geometries are employed to examine the effectiveness of the octree-based partitioning and to test the scalability of parallel execution of the Navier-Stokes solver and hybrid grid adapter on two different parallel systems, the Intel Paragon and the IBM SP2. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 17 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 63
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 79-100 
    ISSN: 0271-2091
    Keywords: volume-of-fluid method ; free surface flows ; second-order model ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: To improve the numerical analysis of free surface convection and interface reconstruction, both first- and second-order algorithms are developed based on the volume-of-fluid method. The methodology applied to the second-order model is to define the second-order linear curve having both face slopes as near horizontal as possible while satisfying the cell's defined volume fraction.The second-order method is compared with the FLAIR method and the first-order method through simulation of the convection for various sizes of circular liquid shapes and solitary waves. For small curvature of the free surface, e.g. circles with large diameter, linear methods such as the FLAIR method and the first-order method show relatively good predictions. However, for large-curvature configurations, e.g. circles with relatively small diameter or solitary waves, the linear approach shows large distortion of the free surface. In contrast, the second-order model always shows powerful prediction capabilities of free surface convection. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 17 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 64
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 101-121 
    ISSN: 0271-2091
    Keywords: Riemann solvers ; Eulerian schemes ; detonations ; shock tracking ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: This paper compares several high-resolution schemes for the computation of detonation waves in solid explosives. The essential difficulty in comparison with the usual application domain of these schemes is due to the complexity and variety of the equations of state which are used. The HLLC Riemann solver is used in the context of an Eulerian MUSCL scheme and in conjunction with a shock-tracking scheme. The motivation and justification for the various choices in the building of these schemes are discussed. The accuracy of both schemes, full Eulerian and shock-tracking variant, is clearly demonstrated. In addition, the validity of the results is shown. For one-dimensional applications the shock-tracking scheme is very accurate and relatively simple. For multidimensional applications it is recommended that the full Eulerian version be used. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 16 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 65
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 177-197 
    ISSN: 0271-2091
    Keywords: unsteady flow ; lifting-line ; numerical computation ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: This paper presents the basis of a computational time-marching approach, for large-aspect ratio lifting systems submitted to unsteady motions, using the lifting-line concept. When engineering requires such an approach, quasi-steady ones are currently encountered, which are based on Prandtl's lifting-line approach for steady flows. The results of recent theoretical works on the unsteady lifting-line, based on the matched asymptotic expansion technique, allow one to improve, on sound theoretical foundations, this quasi-steady approach. The proposed approach solves a first-order approximation of the unsteady outer problem for the time-evolution of the spanwise circulation distribution along the lifting-line. It introduces, in the same kind of process as Prandtl's one, for each span section, an unsteady two-dimensional description of the aerofoil behaviour together with a formulation for the three-dimensional unsteady induced velocity on the lifting-line. The approach's validity is examined through a simple numerical implementation for three wing motion cases. Considering the numerical results it produces, it can be stated that the unsteady lifting-line model implementation can be considered as time-consistent, whereas the quasi-steady one cannot. Furthermore, the approach presented here allows large time steps, even for very unsteady wing motions, and compares favourably with some classical results of R. T. Jones. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 13 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 66
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 217-247 
    ISSN: 0271-2091
    Keywords: puffs and thermals ; turbulence modelling ; jets and plumes ; environmental fluid mechanics ; vortex flow ; added mass ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: The time evolution of a line puff, a turbulent non-buoyant element with significant momentum, is studied using the renormalization group (RNG) k-∊ model. The numerical results show that the puff motion is characterized by a vortex pair flow; the computed flow details and scalar mixing characteristics can be described by self-similar relations beyond a dimensionless time of around 30. The added mass coefficient of the puff motion is found to be approximately unity. The predicted puff flow and mixing rate are substantially similar to those obtained from the standard k-∊ model and are well supported by experimental data. The computed scalar field reveals significant secondary concentration peaks trailing behind in the wake of the puff. The present results suggest that the overall mixing rate of a puff is primarily determined by the large-scale motion and that streamline curvature probably plays a minor role. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 12 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 67
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 251-280 
    ISSN: 0271-2091
    Keywords: turbulence modelling ; eddy viscosity ; second-moment closure ; tidal flows ; finite volume ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: This paper employs one-point, linear eddy viscosity and differential second-moment (DSM) turbulence closures to predict the turbulent characteristics of both rectilinear and circular tidal flows. The numerical scheme is based on a finite volume approach applied to a non-staggered grid such that all flow variables are stored at one and the same set of nodes. Numerical stability is maintained through the implementation of apparent viscosities and source term linearization, which are essential if eddy viscosity terms are absent. A stable algorithm is devised for the Reynolds stresses which includes a non-linear velocity smoothing in order to stabilise the numerical scheme during flow reversal and relaminarization. Favourable agreement with the experimental rectilinear tidal data of Schröder (Tech. Rep. GK55 87/E/16, GKSS-Forshungszentrum Geesthacht, 1983) and McClean (Turbulence and Sediment Transport Measurements in a North Sea Tidal Inlet (the Jade), Springer, New York, 1987, p. 436) is reported. Numerical calculations of circular tidal flows are also presented which were motivated by the preliminary investigations of Davies and Jones (Int. j. numer. meth. fluids,12, 17 (1991)) and Davies (Continental Shelf. Res., 11, 1313 (1991)), who employed the one-equation, k-l, eddy viscosity turbulence model to simulate rectilinear and circular tidal flows. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 68
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 323-343 
    ISSN: 0271-2091
    Keywords: mixed convection ; finite volume algorithm ; eccentricity ; Nusselt number ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: A computational study is performed on two-dimensional mixed convection in an annulus between a horizontal outer cylinder and a heated, rotating, eccentric inner cylinder. The computation has been done using a non-orthogonal grid and a fully collocated finite volume procedure. Solutions are iterated to convergence through a pressure correction scheme and the convection is treated by Van Leer's MUSCL scheme. The numerical procedure adopted here can easily eliminate the ‘Numerical leakage’ phenomenon of the mixed convection problem whereby strong buoyancy and centrifugal effects are encountered in the case of a highly eccentric annulus. Numerical results have been obtained for Rayleigh number Ra ranging from 7×103 to 107, Reynolds number Re from 0 to 1200 and Prandtl number Pr from 0.01 to 7. The mixed rotation parameter σ (=Ra/PrRe2) varies from ∞ (pure natural convection) to 0.01 with various eccentricities ε. The computational results are in good agreement with previous works which show that the mixed convection heat transfer characteristics in the annulus are significantly affected by σ and ε. The results indicate that the mean Nusselt number Nu increases with increasing Ra or Pr but decreases with increasing Re. In the case of a highly eccentric annulus the conduction effect becomes predominant in the throat gap. Hence the crucial phenomenon on whereby Nu first decreases and then increases can be found with increasing eccentricity. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 13 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 69
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 303-322 
    ISSN: 0271-2091
    Keywords: hierarchical grids ; quadtrees ; adaptive remeshing ; separated flows ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: This paper describes the use of adaptive hierarchical grids to predict incompressible separated flow at low Reynolds number. The grids consist of a quadtree system of hierarchical Cartesian meshes which are generated by recursive subdivision about seeding points. The governing equations are discretized in collocated primitive variable form using finite volumes and solved using a pressure correction scheme. The mesh is locally adapted at each time step, with panel division or removal dependent on the vorticity magnitude. The resulting grids have fine local resolution and are economical in array size. Results are presented for unidirectional, impulsively started flow past a circular and a square cylinder at various Reynolds numbers up to 5000 and 250 respectively. It is clear that hierarchical meshes may offer gains in efficiency when applied to complex flow domains or strongly sheared flows. However, as expected, the stepped approximation to curved boundaries resulting from the Cartesian quadtree representation adversely affects the accuracy of the results for flow past a circular cylinder. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 35 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 70
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 443-457 
    ISSN: 0271-2091
    Keywords: direct numerical simulation ; 2D temporal disturbance ; plane Poiseuille flow ; finite difference method ; transient non-linear equation ; stream-function-vorticity equation ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: A direct numerical scheme is developed to study the temporal amplification of a 2D disturbance in plane Poiseuille flow. The transient non-linear Navier-Stokes equations are applied in a region of wavelength moving with the wave propagation speed. The complex amplitude involved in the perturbation functions is considered as the initial input of the non-linear stability equations. In this study a fully implicit finite difference scheme with five points in the flow direction and three points in the normal direction is developed so that numerical simulation of the amplification of a two-dimensional temporal disturbance in plane Poiseuille flow can be investigated. The growth and decay of the disturbance with time are presented and neutral stability curves which are in good agreement with existing solutions can be determined. The critical conditions as a function of the amplitude A0 of the disturbance are presented. Fixing the wavelength, the Navier-Stokes equations are solved up to Re=10,000 a friction factor increasing with Reynolds number is observed. The 2D non-linear behaviour of the streamfunction, vorticity and velocity components at Re=10,000 are also exhibited. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 71
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 485-495 
    ISSN: 0271-2091
    Keywords: capillarity ; free surface ; finite elements ; validation ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: The mathematical formulation of the dynamics of free liquid surfaces including the effects of surface tension is governed by a non-linear system of elliptic differential equations. The major difficulty of getting unique closed solutions only in trivial cases is overcome by numerical methods. This paper considers transient simulations of liquid-gas menisci in vertical capillary tubes and gaps in the presence of gravity. Therefore the CFD code FIDAP 7.52 based on the Galerkin finite element method (FEM) is used. Calculations using the free surface model are presented for a variety of contact angles and cross-sections with experimental and theoretical verification. The liquid column oscillations are compared for numerical accuracy with a mechanical mathematical model, and the sensitivity with respect to the node density is investigated. The efficiency of the numerical treatment of geometric non-trivial problems is demonstrated by a prismatic capillary. Present restrictions limiting efficient transient simulations with irregularly shaped calculational domains are stated. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 15 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 72
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 533-556 
    ISSN: 0271-2091
    Keywords: mixed finite elements ; finite volumes ; groundwater flow and transport ; biodegradation ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: A numerical model for the simulation of flow and transport of organic compounds undergoing bacterial oxygen- and nitrate-based respiration is presented. General assumptions regarding microbial population, bacteria metabolism and effects of oxygen, nitrogen and nutrient concentration on organic substrate rate of consumption are briefly described. The numerical solution techniques for solving both the flow and the transport are presented. The saturated flow equation is discretized using a high-order mixed finite element scheme, which provides a highly accurate estimation of the velocity field. The transport equation for a sorbing porous medium is approximated using a finite volume scheme enclosing an upwind TVD shock-capturing technique for capturing concentration-unsteady steep fronts. The performance and capabilities of the present approach in a bio-remediation context are assessed by considering a set of test problems. The reliability of the numerical results concerning solution accuracy and the computational efficiency in terms of cost and memory requirements are also estimated. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 15 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 73
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 501-517 
    ISSN: 0271-2091
    Keywords: Multiphase ; turbulent ; finite volumes ; structured grids ; compressible flows ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: A numerically fast algorithm has been developed to solve the viscous two-phase flow in an axisymmetric rocket nozzle. A Eulerian-Eulerian approach is employed in the computation to couple the gas-particle flow. Turbulence closure is achieved using a Baldwin-Lomax model. The numerical procedure employs a multistage time-stepping Runge-Kutta scheme in conjunction with a finite volume method and is made computationally fast for the axisymmetric nozzle. The present numerical scheme is applied to compute the flow field inside JPL and AGARD nozzles. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 74
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 627-635 
    ISSN: 0271-2091
    Keywords: arbitrary-order boundary element method ; non-singular formulation ; potential problems ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: This paper presents a general direct integral formulation for potential flows. The singularities of Green's functions are desingularized theoretically, using a subtracting and adding back technique, so that Gaussian quadrature or any other numerical integration methods can be applied directly to evaluate all the integrals without any difficulty. When high-order quadrature formulas are applied globally, the number of unknowns can be reduced. Interpolation functions are not necessary for unknown variables in the present paper. Therefore, the present method is much simpler and more efficient than the conventional one. Several numerical examples are calculated and compared satisfactorily with analytical solutions or published results. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 75
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 637-655 
    ISSN: 0271-2091
    Keywords: liquid flow ; energy transport ; electron-beam ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: A numerical analysis is made of the liquid flow and energy transport in a system to evaporate metals. The energy from an electron-beam heats an axisymmetric metal disk supported by a water-cooled platform. Metal evaporates from the surface of a hot pool of liquid which is surrounded by a shell of its own solid. Flow in the pool is strongly driven by temperature-induced buoyancy and capillary forces, and is located in the transition region between laminar and turbulent flow. The evaporation rate is strongly influenced by the locations of the free boundaries. A modified finite element method is used to calculate the steady state flow and temperature fields coupled with the interface locations. The mesh is structured with spines that stretch and pivot as the interfaces move. The discretized equations are arranged in an ‘arrow’ matrix and are solved using the Newton-Raphson method. The electron-beam power and platform contact resistance are varied for cases involving the evaporation of aluminum. The results reveal the interaction of liquid flow, heat transfer and free interfaces. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 76
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 697-712 
    ISSN: 0271-2091
    Keywords: viscoelastic ; boundary conditions ; tube tooling ; cable-coating ; finite elements ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: A viscoelastic analysis is presented for model tube tooling, draw-down and combined geometry flows encountered in the cable coating industries. The work investigates the development of stress fields and studies the effect of varying entry flow stress boundary conditions. The analysis takes into account tube tooling and draw-down flow sections individually, and in combination. The flow behaviour of cable-coating grade low density polyethylene is studied assuming a viscoelastic, isothermal flow, and employing a Taylor-Petrov-Galerkin finite element scheme with an exponential Phan-Thien-Tanner constitutive model. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 77
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 725-747 
    ISSN: 0271-2091
    Keywords: unsteady two-body interaction ; potential flow theory ; boundary-integral method ; Lagrange's equation of motion ; generalized Taylor's formula ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: On the basis of the potential flow theory, Lagrange's equation of motion is used to study the unsteady ground-effect problem. The forces and moments acting on the moving body are solved in terms of the derivatives of added masses in which the generalized Taylor's formulae are applied. The singular integral equations used to solve the surface source intensities and their derivatives are regularized by the Gauss flux theorem and are therefore amenable to the direct use of the Gaussian quadrature formula. In illustration, the condition of a prolate spheroid moving in the fore-and-aft direction at constant speed past a flat ground with a protrusion is considered. The hydrodynamic forces and moments acting on the moving spheroid are investigated systematically by varying the size of the protrusion and the cruising height of the spheroid. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 78
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 791-809 
    ISSN: 0271-2091
    Keywords: open channel ; subcritical and supercritical flows ; TVD schemes ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: The Saint Venant equations for modelling flow in open channels are solved in this paper, using a variety of total variation diminishing (TVD) schemes. The performance of second- and third-order-accurate TVD schemes is investigated for the computation of free-surface flows, in predicting dam-breaks and extreme flow conditions created by the river bed topography. Convergence of the schemes is quantified by comparing error norms between subsequent iterations. Automatically calculated time steps and entropy corrections allow high CFL numbers and smooth transition between different conditions. In order to compare different approaches with TVD schemes, the most accurate of each type was chosen. All four schemes chosen proved acceptably accurate. However, there are important differences between the schemes in the occurrence of clipping, overshooting and oscillating behaviour and in the highest CFL numbers allowed by a scheme. These variations in behaviour stem from the different orders and inherent properties of the four schemes. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 15 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 79
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 771-789 
    ISSN: 0271-2091
    Keywords: three-dimensional numerical method ; hybrid method ; splitting method ; Eulerian-Lagrangian method ; shallow water equations ; sigma co-ordinate transformation ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: A new efficient numerical method for three-dimensional hydrodynamic computations is presented and discussed in this paper. The method is based on the operator splitting method and combined with Eulerian-Lagrangian method, finite element method and finite difference method. To increase the efficiency and stability of the numerical solutions, the operator splitting method is employed to partition the momentum equations into three parts, according to physical phenomena. A time step is divided into three time substeps. In the first substep, advection and Coriolis force are solved using the explicit Eulerian-Lagrangian method. In the second substep, horizontal diffusion is approximated by implicit FEM in each horizontal layer. In the last substep, the continuity equation is solved by implicit FEM, and vertical diffusion and pressure gradient are discretized by implicit FDM in each nodal column. The stability analysis shows that this method is unconditionally stable. A number of numerical experiments have been performed. The results simulated by the present scheme agree well with analytical solutions and the other documented model results. The method is efficient for 3D shallow water flow computations and fully fits complicated configurations. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 13 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 80
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 837-850 
    ISSN: 0271-2091
    Keywords: dense gas dispersion ; radiation absorption ; discrete transfer method ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: A numerical model is presented for the prediction of thermal radiation absorption in dense gas clouds during accidental release in the atmosphere. The model is based on the discrete transfer method (DT method) that was originally developed for modelling radiation in combustion chambers. The radiation model assumes a number of representative rays of predetermined orientation fired from each of the domain boundaries. Each ray is traced through the domain elements until reaching another boundary where it is terminated. Radiation sources are calculated for each element by performing an energy balance across each element for each ray passing through it. The energy sources recovered are fed into the finite element flow solver for every time step in the energy equation. The model proved accurate, and memory and computer time efficient. It showed that accounting for radiation effects lead to improved predictions. It also showed that in certain scenarios, radiation effects could be predominant. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 81
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 877-885 
    ISSN: 0271-2091
    Keywords: B-spline basis ; Galerkin method ; Gauss-Newton method ; mixed formulation ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: A mixed Galerkin technique with B-spline basis functions is presented to compute two-dimensional incompressible flow in terms of the primitive variable formulation. To circumvent the Babuska-Brezzi stability criterion, the artificial compressibility formulation of the equation of mass conservation is employed. As a result, the diagonal components of the matrix form in the governing equations are not singular. The B-spline basis is used because it is superior to other splines in providing computer solutions to fluid flow problems. One of the advantages of the B-spline basis is that it has excellent approximation properties. Numerical examples of applications of the mixed formulation are presented to demonstrate the convergence characteristics and accuracy of the present formulation. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 82
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 927-957 
    ISSN: 0271-2091
    Keywords: multigrid methods ; finite elements ; finite volumes ; semi-coarsening ; numerical analysis ; turbulent flows ; compressible flows ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Extending multigrid concepts to the calculation of complex compressible flow is usually not straightforward. This is especially true when non-embedded grid hierarchies or volume agglomeration strategies are used to construct a gradation of unstructured grids. In this work, a multigrid method for solving second-order PDE's on stretched unstructured triangulations is studied. The finite volume agglomeration multigrid technique originally developed for solving the Euler equations is used (M.-H. Lallemand and A. Dervieux, in Multigrid Methods, Theory, Applications and Supercomputing, Marcel Dekker, 337-363 (1988)). First, a directional semi-coarsening strategy based on Poisson's equation is proposed. The second-order derivatives are approximated on each level by introducing a correction factor adapted to the semi-coarsening strategy. Then, this method is applied to solve the Poisson equation. It is extended to the 2D Reynolds-averaged Navier-Stokes equations with appropriate boundary treatment for low-Reynolds number turbulent flows. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 32 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 83
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 17-37 
    ISSN: 0271-2091
    Keywords: incompressible Navier-Stokes ; parallel finite element method ; Galerkin approximation ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: A parallel semi-explicit iterative finite element computational procedure for modelling unsteady incompressible fluid flows is presented. During the procedure, element flux vectors are calculated in parallel and then assembled into global flux vectors. Equilibrium iterations which introduce some ‘local implicitness’ are performed at each time step. The number of equilibrium iterations is governed by an implicitness parameter. The present technique retains the advantages of purely explicit schemes, namely (i) the parallel speed-up is equal to the number of parallel processors if the small communication overhead associated with purely explicit schemes is ignored and (ii) the computation time as well as the core memory required is linearly proportional to the number of elements. The incompressibility condition is imposed by using the artificial compressibility technique. A pressure-averaging technique which allows the use of equal-order interpolations for both velocity and pressure, this simplifying the formulation, is employed. Using a standard Galerkin approximation, three benchmark steady and unsteady problems are solved to demonstrate the accuracy of the procedure. In all calculations the Reynolds number is less than 500. At these Reynolds numbers it was found that the physical dissipation is sufficient to stabilize the convective term with no need for additional upwind-type dissipation. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 16 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 84
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 1003-1022 
    ISSN: 0271-2091
    Keywords: steady approach flow ; low Reynolds numbers ; 3D simulation ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: The three-dimensional (3D) unsteady viscous wake of a circular cylinder exposed to a steady approach flow is calculated using a fractional-step finite-difference/spectral-element method. The calculated flow fields at Reynolds numbers of 100 (2D) and 200 (3D) are examined in detail. The flow field at Re = 100 is 2D as expected, while the flow field at Re = 200 has distinct 3D features, with spanwise wavelengths of about 3.75 cylinder diameters. The calculated results produce drag and lift coefficients and Strouhal numbers that agree extremely well with the experimental values. These 3D values at Re = 200 are in better agreement with experimental values than the results of a 2D calculation at Re = 200, which is expected. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 19 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 85
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 1023-1038 
    ISSN: 0271-2091
    Keywords: three-state anemometry ; velocity field ; particle motion equation ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: An application of a new flow measurement technique is described which allows for the non-intrusive simultaneous measurement of flow velocity, density, and viscosity. The viscosity information can be used to derive the flow field temperature. The combination of the three measured variables and the perfect-gas law then leads to an estimate of the flow field thermodynamic pressure. Thus, the instantaneous state of a flow field can be completely described. Three-state anemometry (3SA), a derivative of particle image velocimetry (PIV), which uses a combination of three monodisperse sizes of styrene seeding particles is proposed. A marker seeding is chosen to follow the flow as closely as possible, while intermediate and large seeding populations provide two supplementary velocity fields, which are also dependent on fluid density and viscosity. A simplified particle motion equation, aimed at turbomachinery applications, is then solved over the whole field to provide both density and viscosity data. The three velocity fields can be separated in a number of ways. The simplest and that proposed in this paper is to dye the different populations and view the region of interest through interferometric filters. The two critical aspects needed to enable the implementation of such a technique are a suitable selection of the diameters of the particle populations, and the separation of the velocity fields. There has been extensive work on the seeding particle behaviour which allows an estimate of the suitable particle diameters to be made. A technique is described in this paper to allow the separation of particles in a range of micrometer sized velocity fields through fluorescence (separation through intensity also being possible). Some preliminary results by direct numerical simulation (DNS) of a 3SA image are also presented. The particle sizes chosen were 1 μm and 5 μm, tested on the near-wake flow past a cylinder to investigate viscosity only, assuming uniform flow density. The accuracy of the technique, derived from simulations of swirling flows, is estimated as 0.5% RMS for velocity, 2% RMS for the density and viscosity, and 4% RMS for the temperature estimate. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 86
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 1085-1105 
    ISSN: 0271-2091
    Keywords: adaptive ; hybrid grids ; incompressible ; Navier-Stokes ; finite volume ; pressure correction ; 3-D ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Hybrid grids consisting of prisms and tetrahedra are employed for the solution of the 3-D Navier-Stokes equations of incompressible flow. A pressure correction scheme is employed with a finite volume-finite element spatial discretization. The traditional staggered grid formulation has been substituted with a collocated mesh approach which uses fourth-order artificial dissipation. The hybrid grid is refined adaptively in local regions of appreciable flow variations. The scheme operations are performed on an edge-wise basis which unifies treatment of both types of grid elements. The adaptive method is employed for incompressible flows in both single and multiply-connected domains. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 24 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 87
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 199-215 
    ISSN: 0271-2091
    Keywords: air-conditioning unit ; k-∊ model ; Reynolds stress model ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Details are given of a study to obtain experimental data in an idealized environment for the purpose of evaluating the corresponding computational predictions and which supplement parallel measurements made in actual packaged air-conditioning units. The system consisted of a purpose-built low-speed wind tunnel with a working section constructed to reproduce particular features of the real units. In the experiment, both the mean velocity profiles and turbulence properties of the flow are obtained from triple-hot-wire anemometry measurements. A numerical model, based on finite volume methodology, was used to obtain the solution of the Reynolds-averaged Navier-Stokes equations for incompressible isothermal flow. The Reynolds stress terms in the equations are calculated using the standard k-∊ model and second-moment closure (Reynolds stress) models. The accuracy of the two models was evaluated against the experimental measurements made 10 mm downstream of a baffle. The results show that the standard k-∊ model gave the better agreement except in regions of strong recirculation. © 1997 John Wiley & Sons, Ltd.
    Additional Material: 13 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 88
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 235-247 
    ISSN: 0271-2091
    Keywords: confined explosions ; risk assessment ; CFD ; adaptive mesh refinement ; multiple obstacles ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Explosion hazards constitute a significant practical problem for industry. In response to the need for better-resolved predictions for confined explosions, and particularly with a view to advancing safety cases for offshore oil and gas rigs, an existing unstructured, adaptive mesh, finite volume Reynolds-averaged Navier-Stokes computational fluid dynamics code (originally developed to handle non-combusting turbomachinery flows) has been modified to include a one-equation, eddy break-up combustion model. Two benefits accrue from the use of unstructured, solution-adaptive meshes: first, great geometrical flexibility is possible; second, automatic mesh adaptation allows computational effort to be focused on important or interesting areas of the flow by enhancing mesh resolution only where it is required. In the work reported here, the mesh was adaptively refined to achieve flame front capture, and it is shown that this results in a 10%-33% CPU saving for two-dimensional calculations and a saving of between 57% and 70% for three-dimensional calculations. The geometry of the three-dimensional calculations was relatively simple, and it may be expected that the use of unstructured meshes for truly complex geometries will result in CPU savings sufficient to allow an order-of-magnitude increase in either complexity or resolution. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 89
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 281-301 
    ISSN: 0271-2091
    Keywords: Navier-Stokes equations ; SIMPLE algorithm ; algebraic multigrid methods ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: The application of standard multigrid methods for the solution of the Navier-Stokes equations in complicated domains causes problems in two ways. First, coarsening is not possible to full extent since the geometry must be resolved by the coarsest grid used. Second, for semi-implicit time-stepping schemes, robustness of the convergence rates is usually not obtained for convection-diffusion problems, especially for higher Reynolds numbers. We show that both problems can be overcome by the use of algebraic multigrid (AMG), which we apply for the solution of the pressure and momentum equations in explicit and semi-implicit time-stepping schemes. We consider the convergence rates of AMG for several model problems and demonstrate the robustiness of the proposed scheme. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 90
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 345-364 
    ISSN: 0271-2091
    Keywords: liquid-particle flow ; computational efficiency ; Eulerian-Lagrangian model ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: The dispersion of solid particles in a turbulent liquid flow impinging on a centrebody through an axisymmetric sudden expansion was investigated numerically using a Eulerian-Lagrangian model. Detailed experimental measurements at the inlet were used to specify the inlet conditions for two-phase flow computations. The anisotropy of liquid turbulence was accounted for using a second-moment Reynold stress transport model. A recently developed stochastic-probabilistic model was used to enhance the computational efficiency of Lagrangian trajectory computations. Numerical results of the stochastic-probabilistic model using 650 particle trajectories were compared with those of the conventional stochastic discrete-delta-function model using 18 000 particle trajectories. In addition, results of the two models were compared with experimental measurements. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 13 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 91
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 369-401 
    ISSN: 0271-2091
    Keywords: storm surge ; shallow water model ; grid convergence ; coastal ocean ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: The focus of this paper is a systematic determination of the relationship between grid resolution and errors associated with computations of hurricane storm surge. A grid structure is sought that provides the spatial resolution necessary to capture pertinent storm surge physics and does not overdiscretize. A set of numerical experiments simulating storm surge generation over 14 grid discretizations of idealized domains examines the influence of grid spacing, shoreline detail, coastline resolution and characteristics of the meteorological forcing on storm surge computations. Errors associated with a given grid are estimated using a Richardson-based error estimator. Analysis of the magnitude and location of estimated errors indicates that underresolution on the continental shelf leads to significant overprediction of the primary storm surge. In deeper waters, underresolution causes smearing or damping of the inverted barometer forcing function, which in turn results in underprediction of the surge elevation. In order to maintain a specified error level throughout the duration of the storm, the highest grid resolution is required on the continental shelf and particularly in nearshore areas. The disparity of discretization requirements between deep waters and coastal regions is best met using a graded grid. Application of the graded gridding strategy to the hindcast of Hurricane Camille reinforces the necessity of using a grid that has high levels of resolution in nearshore regions and areas of complex coastal geometry. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 14 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 92
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 27 (1998), S. 127-138 
    ISSN: 0271-2091
    Keywords: compressible flow ; supersonic flows ; aerofoils ; Cauchy/Riemann equations ; Crocco's relation ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: In this paper, alternative formulations of the steady Euler equations for conservation of mass, momentum and energy are adopted for the numerical simulation of compressible flows with shock waves. The total enthalpy is assumed to be constant and hence an isentropic density is calculated in terms of the velocity components. Also, the x- and y-momentum equations written in conservation form are combined to yield the tangential and normal momentum equations. For smooth flows the tangential momentum equation reduces to the entropy transport equation, while the normal momentum equation gives the vorticity in terms of the entropy gradient normal to the flow direction (Crocco's relation). Hence the velocity components can be obtained from the continuity equation and normal momentum equation (Cauchy/Riemann equations), while the entropy correction for the density is obtained from the tangential momentum equation (this correction is not needed in the isentropic flow regions). The present formulation can be easily extended to handle variable total enthalpy. Preliminary results are presented for transonic and supersonic flows over aerofoils and the entropy and vorticity effects are clearly identified. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 93
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 27 (1998), S. 139-157 
    ISSN: 0271-2091
    Keywords: hydrodynamic stability ; finite element method ; incompressible cavity flow ; Arnold's method ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Numerical methods have been applied to theoretical studies of instability and transition to turbulence. In this study an analysis of the linear stability of incompressible flow is undertaken. By means of the finite element method the two-dimensional base flow is computed numerically over a range of Reynolds numbers and is perturbed with three-dimensional disturbances. The partial differential equations governing the evolution of perturbation are obtained from the non-linear Navier-Stokes equations with a slight compressibility by using linear stability and normal mode analysis. In terms of the finite element discretization a non-singular generalized eigenproblem is formulated from these equations whose solution gives the dispersion relation between complex growth rate and wave number. This study presents stability curves to identify the critical Reynolds number and critical wavelength of the neutral mode and discusses the mechanism of instability. The stability of lid-driven cavity flow is examined. Taylor-Göertler-like vortices in the cavity are obtained by means of reconstruction of three-dimensional flows. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 14 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 94
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 26 (1998), S. 519-531 
    ISSN: 0271-2091
    Keywords: wavy channel flow ; peristaltic motion ; spectral collocation method ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: A numerical procedure is developed for the analysis of flow in a channel whose walls describe a travelling wave motion. Following a perturbation method, the primitive variables are expanded in a series with the wall amplitude as the perturbation parameter. The boundary conditions are applied at the mean surface of the channel and the first-order perturbation quantities are calculated using the pseudospectral collocation method. Although limited by the linear analysis, the present approach is not restricted by the Reynolds number of the flow and the wave number and frequency of the wavy-walled channel. Using the computed wall shear stresses, the positions of flow separation and reattachment are determined. The variations in velocity and pressure with frequency of excitation are also presented. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 95
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 27 (1998), S. 207-227 
    ISSN: 0271-2091
    Keywords: directional solidification ; multicomponent alloys ; dendritic monocrystals ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: A finite element model of dendritic solidification of multicomponent alloys is presented that includes solutal convection and is an extension of a previously developed model for solidification of binary alloys. The model is applied to simulation of the solidification of ternary and quaternary Ni-based alloys. The role of solutal convection in the macrosegregation and the formation of freckles is analysed. Calculations show the effects of geometry and material properties on the convection patterns and the attendant segregation. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 96
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 27 (1998), S. 1-11 
    ISSN: 0271-2091
    Keywords: Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: No Abstract
    Additional Material: 1 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 97
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 28 (1998), S. 157-186 
    ISSN: 0271-2091
    Keywords: advective transport ; semi-implicit ; conservative ; unconditionally stable ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: A one-dimensional scalar transport method which is appropriate for simulations over a wide range of Courant number is described. Von Neumann stability and matrix invertibility are guaranteed for all Courant numbers and the method has less diffusive and dispersive error than simpler implicit methods. It is implemented for vertical scalar transport in a three-dimensional hydrodynamic model, with horizontal transport discretized explicitly. The method is applied and compared with simpler semi-implicit methods in several test cases and used for a simulation of scalar transport in an estuary. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 14 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 98
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 28 (1998), S. 23-46 
    ISSN: 0271-2091
    Keywords: domain decomposition ; parallel algorithms ; finite element ; Lagrange multipliers ; projected GMRES ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: A parallel solver based on domain decomposition is presented for the solution of large algebraic systems arising in the finite element discretization of mechanical problems. It is hybrid in the sense that it combines a direct factorization of the local subdomain problems with an iterative treatment of the interface system by a parallel GMRES algorithm. An important feature of the proposed solver is the use of a set of Lagrange multipliers to enforce continuity of the finite element unknowns at the interface. A projection step and a preconditioner are proposed to control the conditioning of the interface matrix.The decomposition of the finite element mesh is formulated as a graph partitioning problem. A two-step approach is used where an initial decomposition is optimized by non-deterministic heuristics to increase the quality of the decomposition.Parallel simulations of a Navier-Stokes flow problem carried out on a Convex Exemplar SPP system with 16 processors show that the use of optimized decompositions and the preconditioning step are keys to obtaining high parallel efficiencies. Typical parallel efficiencies range above 80%. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 99
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 28 (1998), S. 47-72 
    ISSN: 0271-2091
    Keywords: large eddy simulation ; juncture flows ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Large eddy simulation (LES) results are reported for temporally developing solid-solid and solid-rigid-lid juncture flows. A MacCormack-type scheme that is second-order in time, and fourth-order in space for the convective terms and second-order in space for the viscous terms, is used. The simulations are obtained for a low subsonic Mach number. The subgrid-scale stresses (SGS) are modeled using the dynamic modeling procedure. The turbulent flow field generated on a flat-plate boundary layer is used to initialize the juncture flow simulations. The results of the flat-plate boundary layer simulations are validated with experimental and direct numerical simulations (DNS) data. In juncture flow simulations, the presence of an adjacent solid-wall/rigid-lid boundary altered the mean and the turbulent field, setting up gradients in the anisotropy of normal Reynolds stresses resulting in the formation of turbulence-induced secondary vortices. The relative size of these secondary vortices and the distribution of mean and turbulent quantities are in qualitative agreement with the experimental observations for the solid-solid juncture. The overall distribution of the mean and turbulence quantities showed close resemblance between the solid-solid and the solid-rigid-lid junctures; except for the absence of a second vortical region near the rigid-lid boundary. In agreement with the experimental observations, it was found that the normalized anisotropy term exhibited similarity when plotted against the distance from the boundary, regardless of the type of boundary, i.e. solid-wall or rigid-lid. The turbulent kinetic energy increased near the rigid-lid boundary. While the surface normal velocity fluctuations decreased to zero at the rigid-lid boundary, the other two velocity components showed an increase in their energy, which is also consistent with the experimental observations. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 100
    Electronic Resource
    Electronic Resource
    Chichester : Wiley-Blackwell
    International Journal for Numerical Methods in Fluids 28 (1998), S. 113-128 
    ISSN: 0271-2091
    Keywords: optimal control ; Burgers' equation ; data assimilation ; adjoint model ; Engineering ; Numerical Methods and Modeling
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: In order to use the optimal control techniques in models of geophysical flow circulation, an application to a 1D advection-diffusion equation, the so-called Burgers' equation, is described. The aim of optimal control is to find the best parameters of the model which ensure the closest simulation to the observed values. In a more general case, the continuous problem and the corresponding discrete form are formulated. Three kinds of simulation are realized to validate the method. Optimal control processes by initial and boundary conditions require an implicit discretization scheme on the first time step and a decentered one for the non-linear advection term on boundaries. The robustness of the method is tested with a noised dataset and random values of the initial controls. The optimization process of the viscosity coefficient as a time- and space-dependent variable is more difficult. A numerical study of the model sensitivity is carried out. Finally, the numerical application of the simultaneous control by the initial conditions, the boundary conditions and the viscosity coefficient allows a possible influence between controls to be taken into account. These numerical experiments give methodological rules for applications to more complex situations. © 1998 John Wiley & Sons, Ltd.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...