ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
The influence of chloroacetyl chlorides and chloroacetic acids on the corrosion of metals in trichloroethylene and tetrachloroethyleneThe corrosive behaviour of selected stainless steels, nickel, copper and zinc materials in trichloroethylene and tetrachloroethylene containing dichloroacetic acid and dichloroacetyl chloride or trichloroacetic acid and trichloroacetyl chloride in concentrations between 100 and 10000 ppm from room temperature to the boiling point was investigated.NiCu 30 Fe was resistant in all systems investigated. Only tetrachloroethylene containing trichloroacetyl chloride corroded the stainless steels. Corrosion rates up to 0.07 mm/y and a tendency towards pitting corrosion were detected.Trichloroethylene containing dichloroacetic acid proofed aggressive towards Cu-DHP, CuZn 15, and CuSn 6. Corrosion rates between 0.14 and 0.32 mm/y were observed.Tetrachloroethylene containing trichloroacetic acid was far less corrosive towards copper materials. In tetrachloroethylene, containing trichloroacetyl chloride, of the copper materials investigated, CuZn 15 and CuAl8 were relatively strongly attacked (corrosion rate 0.10 mm/y).Of the investigated materials, Zn 99.95 was the least resistant to corrosion. Solutions containing acids and acid chlorides proofed to be the most aggressive with corrosion rates between 0.56 and 0.66 mm/y.Some corrosion products, developed on the metal surfaces, were analysed.
Notes:
Von Raumtemperatur bis zur Siedetemperatur wurde das Korrosionsverhalten ausgewählter hochlegierter Stähle, Nickel-, Kupfer- und Zinkwerkstoffe in Trichlorethylen und Perchlorethylen untersucht, die Dichloressigsäure und Dichloracetylchlorid bzw. Trichloressigsäure und Trichloracetylchlorid in Konzentrationen zwischen 100 and 10 000 ppm enthielten.Die Nickelbasislegierung NiCu 30 Fe erwies sich in allen untersuchten Medien als der beständigste Werkstoff. Die hochlegierten Stähle wurden nur gering mit Abtragsraten bis 0,07 mm/a, aber mit Neigung zur Lochkorrosion in trichloracetylchloridhaltigem Perchlorethylen angegriffen.Dichloressigsäurehaltiges Trichlorethylen korrodierte SF-Cu, CuZn 15 und CuSn 6 merklich; Abtragsraten zwischen 0,14 and 0,32 mm/a wurden beobachtet.Mit Trichloressigsäure versetztes Perchlorethylen wirkte auf die Kupferwerkstoffe wesentlich weniger korrosiv ein. Von den untersuchten Kupferwerkstoffen wurden CuZn 15 and CuAl8 in trichloracetylchloridhaltigem Perchlorethylen mit 0,10 mm/a am stärksten korrodiert.Zn 99.95 erwies sich von den untersuchten Werkstoffen als am wenigsten beständig. Bei gleichzeitiger Anwesenheit von Säure und Säurechlorid lagen die Abtragsraten zwischen 0,56 und 0,66 mm/a.An den Metalloberflächen gebildete Korrosionsprodukte wurden analysiert.
Additional Material:
6 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19840350104
Permalink